aaron moore

Good to see more of them getting around, prints turned out well. Would advise covering the printer in a plastic or something to protect it, especially where youd touch when setting up a print etc, the resin gets absolutely everywhere, once it gets onto the touch screen reading it becomes a disaster

Maybe more whats on your printer, but- adjustable (hopefully) rear wheels for the larger 3000 series Masseys

In the process of building an above ground store for a customer, valves and first reception tank completed between juggling silage, minding cows at balmoral and uni. Final details now, I’ll throw up the completed thing during the week

Yep, all printed as one, with the drawbar separate, it works, but the spring detail isn't great, think I'll be just doing the chassis and springs separate for any future builds

Cheers, 3D printed in PLA just, still need to do some refining on the CAD side of things and a couple of tweaks with the printing itself, these were more of a feasibility test than anything to see if they could be printed in situ

Nice little 12t bailey coming along. Body and axles just to finish now

Good story lines here, interesting to follow along, very realistic farm too with the crop rotations. Keep it up!

The new sheds looking well! That milk tank is a good size too, how many liters is it? Were you using flux, or a flux cored solder? This can be a cause of the solder going everywhere, it almost just rolls off the metal.

Here you go....little else to do on a Satuday night and its starting to annoy my OCD ha ha!

if your still looking for one theres this one on ebay http://www.ebay.co.uk/itm/STOLL-V-202-BEET-HARVESTER-NIB-/380551119793?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item589a9d43b1

looking at it yes it looks like it has one on the far side in front of the engine could be wrong though.

Has the trailer got a steering axle? looks great though

Got the britains livestock transporter in blue today got trailer looks like a vast improvement on the last one

My mini bought on 15th April 2011this is a work in progress and will be finished as a rally spec one and my little john deere lawnmower i got for christmas 2007 along with the other tractor kit oh and the 135 is nearly done now i will have to get some current pictures up of it another one of the fergie on a postcard i made for this year (P.S. I only have a load of pictures of the fergie as i dont like posting pictures of stuff thats not completed yet)

hi again guys just a few pictures of my stuff the wee fergie i got this on the 22nd of september 2008 a wee bit of an arty shot and the link box for it came on the same day bought just a few yards from the tractor P.S. the tree in the right hand bottom corner has been ripped out to build a shed for more tractors

Thanks for the warm welcomes guys looks to be a very close forum

Hi I've just had a look through the topic and you have some really nice machines looking forward to the next lot of pictures

hello ive been on this forum for a while now so i thought i should probably start this topic. i'm form Northern Ireland my dad and i have a couple of classic masseys in the garage as well as minis and other old cars. i mainly collect 1/32 John Deere, Massey Ferguson with a few New Hollands and Fendts mixed in and and implements that take my fancy. I also started converting and scratch building for my model farm (its not done yet ill have pictures up in a few weeks). my farm is called oak brook farm and runs mainly NH and JD the odd MF. yours Aaron

ok thanks for the help Aaron

hi do you have any more pictures of the shed on page 189 with the ford infront of it it would be much appreciated thanks Aaron

would this maybe more your size? http://www.ebay.co.uk/itm/MODELS-ENGINEER-HOBBYS-CRAFTS-MAXPRO-MINI-ANVIL-390gms-/310305504237?_trksid=p4340.m1374&_trkparms=algo%3DPI.WATCH%26its%3DC%252BS%26itu%3DUCC%26otn%3D5%26ps%3D63%26clkid%3D4960877847340279349#ht_1289wt_952

does the tractor has the linkage attached with screws if it does If you look at were the link arm meets the tractor there should be a screw where the arm attaches get a small screwdriver and tighten the screw up

On that kuhn mower does it lift up parallel to the cab

it just worked for me

Orchard Motorsport - Armagh City Model Shop - Main street Lurgan Co. Armagh Graham Chapman - Co. Armagh Farmrite - Portadown Co. Armagh Fane Valley - Portadown Co. Armagh Camerons, Ballymena - Co. Antrim Ground Control, Lisburn - Co. Antrim Fane Valley - Banbridge Co. Down Kingdom Trucks - Comber Co. Down Old Forge Models - Comber Co. Down Lake view - Loughbrickland Co. Down Toymaster - Banbridge Co. Down Model Shop - Belfast Co. Down Comber Post Office - Co. Down FM tractors - Ardstraw Co. Tyrone Fane Valley - Omagh Co.Tyrone whites/Toymaster - Omagh Co.Tyrone DM farm models - Omagh Co. Tyrone G.W. Gibson & Son General Merchants - Beragh Co. Tyrone O Mhurucus centra/collectors toyshop - Innashannon Co. Cork Marks Models - Cork City Modelmania michelsown - Co. Cork RB Models - Clonmel Co. Tipperary Galway Farm Models - Co. Galway Lynch Farm Models - Co. Limerick Model Mad - Co. Kerry try googling some of those and you should probably get some addresses or come up to the moira show