mike whiting

Is it resin with no moving parts?

Yes, great read @Pete132. Sounds like there'll be plenty of model combines available with the announcement of the Marge Claas EVION. Wonder if the UH Ideals will be tracked, wheeled or both?

FB today presented in Germany, Claas Evion

Has this one crept in under the radar https://brushwoodtoys.co.uk/collections/schuco/products/sch7878-schuco-132-scale-international-ih-956-xl-2wd-tractor , although 4WD, not 2wd

Great model, many of you have heard this or commented before, but please can we have some new models which are fresh designs.

Thanks @Pete132, just thought I'd check before going into the unknown

Can someone provide the method to change the front linkage to the weight on the JD 8400 without ending up with the model in lots of pieces, thanks

Thanks @SPN

Has anybody purchased the Schuco Rabe plough, any views?

@super6 heres my towed ring press, a great model, 100% brass and metal, I'd like to swap the wheels for some with more realistic tyres, possibly flotation also adding a rear lighting system. I had the model made to fit the width of my display cabinet

No, they were produced by bloke who attended Toytrac. He used the simba parts for packer rollers. I had one of his fertiliser spreaders with a bag lifter. Can't remember his name but as far as Im aware he stopped modelling a few years ago.

I'll try the two screws under the rear axle first, reverse assembly process

This is one of the first editions of the Weise MF 1014 if that makes any difference

Hi @Paul Palmer how do I get to the screws? I noticed you didn't remove the front axle. Did you have to take off the 4WD transmission drive running underneath? I can see one of the screw housings just behind the front axle, thanks Mike

Thanks @Paul Palmer I'll take look

I'm planning to do a bonnet swap on a MF 1014 to a resin MF699. Can anyone provide guidance on removal of the bonnet, and where headlights can be purchased from for the new grill, thanks

@Paul PalmerPeople were asking about availability on FB, no indication of cost. Expect nothing much below 100 euros? The Classic Tractor article referred to McHale keeping close tabs on the development of a new model with no further details. Inevitable it was going to be another baler or possibly mowers. Looks a better creation than the Claas Agritechnica model. Hopefully it'll be a model on general release and looks as though it will be popular.

Looks to be a good model courtesy of FB. Also follows article from Classic Tractor that McHale had plans for early 2024 check out Clement etc ses miniatures on FB

When it warms up at the weekend @super6 I'll go in the loft and let you know

I have the ltd ed Keeble Bros cultivator which they produced back in 2003. I have the certificate (somewhere), along with the ring press as per the previous images

Thanks for the update @James Joe Dewar

Thanks @Tractorman810 I haven't the part number, if anyone knows please pass the details on. Although I'd be interested in comments on the model from anyone that's purchased the model already. There was reference to the European style drawbar. Surely UH will release a standard issue specification to cover the costs of development ?

Does anyone know if the Agritechnica UH 1/32 Claas Variant 585RC can be ordered via dealers as they don't ship direct to the UK due to Brexit. Couldn't see it on the Claas website

Any views on the new MF 6S and 7S models?

https://northwestfarmmodels.co.uk/products/wiking-1-32-scale-john-deere-6r-250-tractor ?