catkom3 Posted August 9, 2012 Share Posted August 9, 2012 Hope these are the right size,not so keen on this Linux machine,nice sunny day here so went looking for Dragonflies,found a nice Claas Jaguar 940 instead,the only one in the whole of Kinross-Shire,must have been a heavy crop,he was filling those trailers in 5/600 meters,only three trailers,so he had to wait quite often,and the pit was about half a mile away,two NH 7030's with K trailers,not sure what the Fergy combo was, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted August 9, 2012 Share Posted August 9, 2012 Nice photos Joe, the mf is on a Bailey trailer 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted August 10, 2012 Share Posted August 10, 2012 Nice photos Joe, the mf is on a Bailey trailer Ah,thanks for that,I would not have known,not a lot of silage round here,I did speak to the farmer who run's that 940,he said they were filling those trailers in two minutes,wish I'd video'd it now, Regards Joe. Quote Link to comment Share on other sites More sharing options...
catkom3 Posted August 1, 2013 Share Posted August 1, 2013 My old friend the TerraGator 2244 lime spreader,I'll need to keep an eye out for it now it's back in the area, Regards Joe. 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted September 18, 2013 Share Posted September 18, 2013 I saw this rather impressive Agrifac Condor today,interesting to see it had a Yara N-Sensor on top,Jack,do you know anything about this machine,?? Then about half a mile down the road,I spotted the Grimme 220 in the middle of a field,stationary,pretty sure it's the same one I photographed a couple of weeks ago only 5/6 miles from here,demonstrator maybe doing the rounds,?? Another 1/2 mile down the road,i came upon these two old Fahrs,this M1302 still earns a crust, But this M 1800?? is not so fortunate, Regards Joe. 2 Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted September 19, 2013 Share Posted September 19, 2013 That agrifac has some fair booms on it. Nice pictures Joe 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted September 20, 2013 Share Posted September 20, 2013 Well,i reckoned I'd see this one today,it's the same one I snapped yesterday stationary,but today it was working,I'm fairly sure there was two trailled harvesters in that field as well,I saw them from the motorway when I was heading to Perth, But it was a bit of a bonus spotting this one as well,this is the one I saw about three weeks ago,thinking it to be a new Grimme proto Regards Joe. Quote Link to comment Share on other sites More sharing options...
Niels Posted September 24, 2013 Author Share Posted September 24, 2013 I saw this rather impressive Agrifac Condor today,interesting to see it had a Yara N-Sensor on top,Jack,do you know anything about this machine,?? Regards Joe. You mean the Condor or the Yara? Condor is the new 2013/14 model (stainless exhaust) with AdBlue FPT-engine (New Holland) in it. Produced in Holland, sold in the UK now for 2 years I think. By the looks of it i'd say it is fitted with 36 or 40m booms. Obviously Claas Vista II cab, GPS comes as standard, 5000L tank and best of all, its build in Holland. http://www.agrifac.eu/en/sprayers/condor3400.html 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted September 24, 2013 Share Posted September 24, 2013 The Condor Niels,although I guess the Yara is a bit special in it's own right, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Fenside MF Posted May 10, 2016 Share Posted May 10, 2016 saw these parked after planting behind my house last week,nh t6050 with flatbed marston hauling down the seed potatoes to the 724 with four row standen h400 planter loaded by cat,other kit they took home was a fendt 724 with 5 meter folding power harrow,fendt 724 with 4 meter baselier rotavator and another fendt 820 hitched up to the baselier on day one 2 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted May 11, 2016 Share Posted May 11, 2016 (edited) Spotted some nice destoneing and ridgeing today,the Scanstone must have been a new machine as the Scanstone pickup was also in the field,was a wee bit surprised the Massey 7626 was on the powered ridger and the 936 was on the unpowered version,?? The wee D2 was being "bump" started by the Manitou,my Dad was probably the last man to drive that on a farm over 50 years ago,nice to see it running again,although Chic,the guy driving it is looking for a magneto for it , Regards Joe. Edited May 11, 2016 by catkom3 7 Quote Link to comment Share on other sites More sharing options...
ertlerik Posted May 13, 2016 Share Posted May 13, 2016 1056 6 Quote Link to comment Share on other sites More sharing options...
smithy Posted May 13, 2016 Share Posted May 13, 2016 3 minutes ago, ertlerik said: 1056 That's what I call a proper tractor , it looks in good condition 2 1 Quote Link to comment Share on other sites More sharing options...
weblet375 Posted July 17, 2017 Share Posted July 17, 2017 I saw a local company picking up lyceen with a jd forager. They run all jd 6R tractors and a mixture of Richard western and baily trailers. They are called. DENGIE CROPS ..Pictures hope you like. sorry i was a bit far . away 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted July 21, 2017 Share Posted July 21, 2017 Saw something interesting today at work,was at the back of a tractor trailer combo,but the trailer was unfamiliar,strange colour and big,well he took a left and I could see what it was,it was a Dezeure D20 transfer trailer,never seen one before and never thought I would,not around here,was going to put this in the "What did you see" thread,but five minutes later I saw another one,then another,but he was on the grass verge opposite a Lay-By so I snapped him,must be a big job useing three of them,?? http://www.dezeure.be/en/product/overload-trailer-2-axles/ Regards Joe. 2 Quote Link to comment Share on other sites More sharing options...
SPN Posted July 25, 2017 Share Posted July 25, 2017 (edited) Saw a Lexion pass up the road yesterday evening, so went hunting today and with a little bit of help from a friend, I found the trolley. But there wasn't just one trolley. How's that for a find? Two 132 registered (July 2013) 780TTs with consecutive registration numbers. Edited July 25, 2017 by SPN 3 Quote Link to comment Share on other sites More sharing options...
FendtFarmer Posted July 25, 2017 Share Posted July 25, 2017 On combing oil seed today 1 Quote Link to comment Share on other sites More sharing options...
SPN Posted July 25, 2017 Share Posted July 25, 2017 (edited) They are owned by a large farming and farm services company locally. They farm about 3,500 acres in Ireland and have been involved in farming in South America and Eastern Europe as well Edited July 25, 2017 by SPN 4 Quote Link to comment Share on other sites More sharing options...
SPN Posted July 25, 2017 Share Posted July 25, 2017 (edited) JQ T8.345 on the 24 ton Richard Western Chaser Bin. Two 2017 Fendt 724s, a T6080 and a Steyr CVT170 on the road with triple axle Broughans Edited July 25, 2017 by SPN 5 Quote Link to comment Share on other sites More sharing options...
Hillview Posted July 25, 2017 Share Posted July 25, 2017 Nice find Stan. Good photos. 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted July 29, 2017 Share Posted July 29, 2017 Hope these work,useing new software,?? Photographed these guys working yesterday,had hoped to see a 13.7 mtr header,I was informed they were getting one,but seemed to be still useing the 12's,never seen a big JCB like that before,I'm guessing 320 HP,would that be correct,?? Regards Joe. 2 Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 30, 2017 Share Posted July 30, 2017 11 hours ago, catkom3 said: Hope these work,useing new software,?? Photographed these guys working yesterday,had hoped to see a 13.7 mtr header,I was informed they were getting one,but seemed to be still useing the 12's,never seen a big JCB like that before,I'm guessing 320 HP,would that be correct,?? Regards Joe. nice pictures Joe,i think that fastrac tops out at 348 hp 2 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted July 30, 2017 Share Posted July 30, 2017 48 minutes ago, Paul Palmer said: nice pictures Joe,i think that fastrac tops out at 348 hp Cheers Paul,I knew you would know,as soon as I saw it I just knew you were the man, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 30, 2017 Share Posted July 30, 2017 2 minutes ago, catkom3 said: Cheers Paul,I knew you would know,as soon as I saw it I just knew you were the man, Regards Joe. nice fleet there Joe,fendts,fastrac and did i spy a jd by the header trailers? are they all from the same farm/company? Quote Link to comment Share on other sites More sharing options...
catkom3 Posted July 30, 2017 Share Posted July 30, 2017 Yes Paul,all owned by the same farm,https://www.hay-farms.com/gallery/ Used to be all John Deere,8000's I think,but then went over to Fendt,they were toying with getting a 1050,but now believe there's another big John Deere coming,and yes John Deere on the header trailer,my mates son was on that last season,it was him told me they were getting the 13.7 header this year,just not seen it yet,maybe if it dries up here I'll catch them this afternoon,would like to get both 780's side by side, Regards Joe. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.