Stabliofarmer Posted December 9, 2017 Share Posted December 9, 2017 (edited) As those who were at the Penrith show will have seen Ive recently started a new diorama. My main aim is to achieve a model railway standard of realism over an entire diorama. The plan is a hill farm of largely and some pedigree beef cattle. I currently have ideas that will easily spread out over a 12x4ft area. For now though I have focused on a handling yard, unhappy with the last two attempts I've made at them. I will try to explain the process in making most of the bits and pieces, as I was rushing to finish this part for the show I didn't take step by step photos of each process but those that I've missed will be repeated in other areas of the farm and guides made then. For now here is the handling yard, right in the swing of summer as shearing takes place. Edited November 3, 2018 by Stabliofarmer Decided on the farm name as 'Grouse Knowl Fold' 4 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted December 9, 2017 Author Share Posted December 9, 2017 5 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stabliofarmer Posted December 9, 2017 Author Popular Post Share Posted December 9, 2017 10 2 Quote Link to comment Share on other sites More sharing options...
b_emmons Posted December 9, 2017 Share Posted December 9, 2017 your diorama looks excellent James Quote Link to comment Share on other sites More sharing options...
Oakley Farms Posted December 9, 2017 Share Posted December 9, 2017 Brilliant detail James, well done Quote Link to comment Share on other sites More sharing options...
Valley Axe Man Posted December 10, 2017 Share Posted December 10, 2017 After seeing this at Penrith James, i'd say your photo's only give half the story, until you can actually see it in the flesh. look forward to seeing alot more of this take shape Quote Link to comment Share on other sites More sharing options...
mb86 Posted December 10, 2017 Share Posted December 10, 2017 Looking great so far James. Something different to the usual diorama with the sheep. Quote Link to comment Share on other sites More sharing options...
844john Posted December 10, 2017 Share Posted December 10, 2017 Looking very good James, can't bring myself to"like" it though, I HATE Clipping time!!!! 1 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted December 11, 2017 Author Share Posted December 11, 2017 Thanks very much, very excited about building more of this dio. Will get some build pics up soon 1 Quote Link to comment Share on other sites More sharing options...
Wayne D Posted December 11, 2017 Share Posted December 11, 2017 Awesome layout, really looks great and something very different. Good work. 1 Quote Link to comment Share on other sites More sharing options...
charlieoneil Posted January 10, 2018 Share Posted January 10, 2018 Great work looks brilliant 1 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted January 24, 2018 Author Share Posted January 24, 2018 Thanks for the feedback guys appreciated. So heres how the walls were done My first attempt used Bromley Crafts Realistic Brick compound https://www.craft-products.com/realistic-brick-compound.php. The wall structure was made from mountboard and glued to the base. Originally the walls where painted a light grey but after seeing timms work on the forum using a much darker background I opted for painting the walls black. Work started with the gate posts. The edges of each gateway where masked off and a layer of brick compound applied, masking tape removed, allowed to set and a layer of matt varnish applied to lock it in place. Before adding the varnish any stray blobs or irregularities can be removed with sandpaper or a scalpel. Next the main stone work was applied. The rough stone stencil provided by Bromley just doesn't reflect the stone shape common to my local area so I set about making my own stencil. I drew out a stone pattern on paper then using a sheet of, I think 190 micron thick, Mylar layed over the paper pattern I cut out the shapes in the mylar with a craft knife. The top of the wall was masked off for the capping stones and the compound applied in a rough uneven layer. (There are various youtube videos depicting how to use the realistic brick compound as well as a guide in my old Torrax Farm topic) Finally the capping stones where done by using millimeter wide masking tape layed approximately 1 mil appart and a layer of brick compound applied I eventually came to the decision that the results where not up to the realism standard I was aiming for and subsequently I scrapped these walls and started again. I still maintain that the compund is probably the fastest realistic method to creating stone walling at an affordable price. I just knew I could get more life like. 3 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted January 24, 2018 Author Share Posted January 24, 2018 So I was back to square one. My first thought was to revert to a method Ive used previously which involved carving stone workeffect into DAS modelling clay. For a bit of inspiration I set off to browse Iain Robinsons blog, a bible for modelmaking, to sadly see he had taken it down because of various nit picky model railway stuff. The last I had seen Robinson was looking at using Foamex for carving walls and from here I set about searching the internet for scraps of info. (Later on in this project I willam be using Foamex to make the farmhouse which I have started and I think there are some pics in the whats on you're work bench topic.) I eventually found the rather artsy David Neat, describing himself as a 'maker and teacher of making'. Within his website he shows another material for modelling walls, similar to Foamex, Kapa Line Foam board. https://davidneat.wordpress.com/materials/surfacing/kapa-line-foamboard/ The material looked perfect and I ordered some 5mm board from 4D http://modelshop.co.uk/Shop/Raw-Materials/Foamboard/Item/Foamboard-KAPA-line-white/ITM4981 Now heres the method I used. I cut the board to the height I wanted the walls to be without the capping stones. Then peeled the paper backing off. To get stone pattern right I took a ride out onto the moors taking snaps of various bits of stone wall. I then drew out a suitable pattern in pencil on the board. Using a pointed craft tool I then carved out the stone work. I found for smaller bits the line had to be cut with a blade before passing over with the point or the material would just rip. The board is much easier to carve than clay meaning longer periods of time could be spent on carving making this process a faster one. The properties of this board mean that by pressing in individual stones the uneven nature of drystone walling could be replicated. 2 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted January 24, 2018 Author Share Posted January 24, 2018 In the next photos ignore the paint, this was me experimenting with the best paint method. I will explain painting later. The two wall pieces where glued back to back with a five millimetre strip of mountboard stuck at the bottom to make the bottom wider than the top like a realtrue wall. Gate posts where made using 5mm Foamex. Cut to size and glued back to back it was roughed up using 80 grit sand paper to back to give a cut stone look. These where glued to the end of each wall section. Capping stones where next. These where made of mount board. Lengths where cut the width of the wall and individual stones cut at various lengths from these strips. All cutting was done using a pair of tin snips as this gave a nice rough cut that better resembled stone than a perfect straight cut from a knife. First layer was layed horizontally. And then the rest where stacked together glued in place with UHU adhesive. The other part to mention is corners. I had a look at how corners where in real life. And from here replicated in miniature. A mitre joint on the end of the board meant seamless transistion from each side. The rock holding the capping stones was made in thethe same way as the gate posts. 3 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted January 24, 2018 Author Share Posted January 24, 2018 (edited) The last step was paint. A base layer of Acrylic 'Naples Yellow' was applied. This quite nicley matches the colour of local fresh cut sand stone. Once well dryed a watered down wash of black poster paint was applied, this highlights all the nooks and cranies and defines the individual stones, as well as dulling down the yellow. A layer of matt varnish was applied to fix it in place. Next various brown and green shades of acrylic where dry brushed onto the wall until it was dulled down to colour similar to my reference pics. More greens where added to one side of most walls to highlight where moss would be growing more as the sun reached areas of wall but not others. A final layer of varnish fixed everything in place and helps protect the board from warping with damp. That brings how the walls where done to a close. Any queries don't hesitate to ask! Edited January 24, 2018 by Stabliofarmer 2 1 Quote Link to comment Share on other sites More sharing options...
b_emmons Posted January 24, 2018 Share Posted January 24, 2018 great information about making wall's James 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stabliofarmer Posted March 4, 2018 Author Popular Post Share Posted March 4, 2018 Work started on the next part of the farm, a traditional stone barn. This will have a two stables and a staircase at the rear, a shippon/byre/cow shed projecting from the front, hay lofts either side of the arch doors and a workers cottage on the end which I'm looking forward to furnishing. Also trying going to try and make it look like its built on a slope. Thanks for looking 13 Quote Link to comment Share on other sites More sharing options...
Wayne D Posted March 4, 2018 Share Posted March 4, 2018 Very impressive mate. Great work. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stabliofarmer Posted April 7, 2018 Author Popular Post Share Posted April 7, 2018 (edited) Got some time on the barn Next step was to weather the stone down so it's a little less yellow. In my local area the barns vary in colour, there are a number of barn conversions that have been shot blast and are the yellow of the barn in the above photos. Then there are those that are tucked deep into rural valleys that have similar colours to the drystone walls posted earlier, natural earthy browns and greens. Then there's ones that are black that at some point where in direct line of a towns many factory chimneys. It is this style I am aiming for, the back story being that the flat area of land that the sheep yard sits on was once the site of a mill. This means that the stone walls of the yard aren't coloured by the soot from the mills chimney but the adjoining stone barn that stood at the same time as the mill would be much more blackened. This also gives scope for a chimney ruin in a field behind the sheep yard to be added at a later date. Anyway, for now the process. The start point is dry brushing a black enamel onto the stone work. This is built up until suitable, then with a sponge various acrylic greens and browns were daubed on and blended in with a finger to simulate moss etc. This gave the following results Which then received a thick application of matt varnish to lock the colours in before pointing commenced. Pointing is done using tile grout. The grout is sprinkled onto the stone work Then with the back of the spoon spread around the wall Now using a finger, as a brush would pull the grout out of the stone, the grout is pushed into the score lines of the stone. This is done over the whole wall, as much grout as possible is brushed away from the stones themselves so the stones can be seen. A 30:70 mix of Isopropyl Alcohol and Water is then sprayed over the grout. I have used a perfume style bottle to get a fine atomised spray. The alcohol removes the surface tension for the next step of the process. A 50:50 PVA water mix is then applied heavily over the wall and rubbed into the grout. Excessive excess PVA is daubed away with a paper towel and the glue left to soak into the grout to let it set hard. The result is a slightly milkly/clouded layer over the whole wall, this is because of the absorbent nature of the kapa foam board, this process is adapted from guides using plaster cast stone walls which don't absorb in the same way and therefore the grout can be removed from all the stone surfaces. To over come this another dry brushing of black enamel was carried out. Then to die down the sharpness of the white tile grout a watered down black poster paint wash is applied over the whole wall. This brings me to the point I'm at now, the stone is slightly blacker than I would like so I will probably go over the whole lot with cotton wool soaked in turps to take some black off. Edited April 7, 2018 by Stabliofarmer 11 Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted April 7, 2018 Share Posted April 7, 2018 Very nice James Its come out really well! 1 Quote Link to comment Share on other sites More sharing options...
SPN Posted April 7, 2018 Share Posted April 7, 2018 Thank you James for sharing all this detail. 1 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted April 8, 2018 Author Share Posted April 8, 2018 Thanks guys, I know I'm waffling a lot but hopefully there's the odd bits and pieces that help someone out. 1 Quote Link to comment Share on other sites More sharing options...
timms Posted April 8, 2018 Share Posted April 8, 2018 Excellent work again James will definitely try this board some time 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted April 8, 2018 Share Posted April 8, 2018 very nice james, looking forward to the next step, just a thought,rather than using white grout powder, and havng to repaint over on e dry, what about using a grey coloured grout powder, you can get a fair few different colours now, may save you some time/work with luck 2 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted April 8, 2018 Author Share Posted April 8, 2018 Cheers guys, yes a grey grout would be more suitable. The main reason for white was simply that's what the shop had but it does also allow for abit of free rain in how to colour it as I may moss it up abit with some green that wouldn't show as well with grey. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.