Tractorman810 Posted May 1, 2021 Share Posted May 1, 2021 already have joe, if they cant see it then theres no hope 😄 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted May 1, 2021 Share Posted May 1, 2021 Sean I saw that, And backed you up to try and get the poster to comment as to whether he drilled it out and used a rivet or whatever, Watch that space, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 1, 2021 Share Posted May 1, 2021 he ,or someone , has drilled it, rough as rats, rivets cut wonky at the top, not pushed up all the way,as theres a gap underneath if you look , all the cuttings are still in place,no attempt to sand them off .good idea but poor finish . Quote Link to comment Share on other sites More sharing options...
catkom3 Posted May 1, 2021 Share Posted May 1, 2021 2 minutes ago, Tractorman810 said: he ,or someone , has drilled it, rough as rats, rivets cut wonky at the top, not pushed up all the way,as theres a gap underneath if you look , all the cuttings are still in place,no attempt to sand them off .good idea but poor finish . Hopefully someone else will have another new one and can verify, They did screw up with Jos's Fergy exhaust so it could be legit, cheap and nasty fix, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 1, 2021 Share Posted May 1, 2021 4 minutes ago, catkom3 said: Hopefully someone else will have another new one and can verify, They did screw up with Jos's Fergy exhaust so it could be legit, cheap and nasty fix, Regards Joe. doubt it joe, would be cheaper and quicker to glue a plastic clevis type or a plastic euro one on that drill every casting and fit a rough cut rivet, with jos’s mf’s they replaced the lot , didnt do a half arsed fix on them. 1 Quote Link to comment Share on other sites More sharing options...
CX820Joe Posted May 7, 2021 Share Posted May 7, 2021 Seen on Facebook UH are re-releasing the MF 3080 this year 1 Quote Link to comment Share on other sites More sharing options...
phil phoenix Posted May 8, 2021 Share Posted May 8, 2021 Will it have the same crap wheels and tyres as the original I wonder? Whats the point anyway, Toys Farms 3095 was a much better model with decent running gear on it. Quote Link to comment Share on other sites More sharing options...
catkom3 Posted May 8, 2021 Share Posted May 8, 2021 This is one of the Facebook photo's, Price is €39.95, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 8, 2021 Share Posted May 8, 2021 am surprised they didnt put the bigger rims on,even if it was the silver ones of the 3120, just to make it different, maybe jos had some sort of agreement with them they wouldnt, that or ifs a container or two full thats been found in the warehouse they didn't know they had . 1 Quote Link to comment Share on other sites More sharing options...
mike whiting Posted May 8, 2021 Share Posted May 8, 2021 Knocked the flashing beacon off mine by mistake, reduced the stem and refitted, subtle surgery made such an improvement Quote Link to comment Share on other sites More sharing options...
mb86 Posted May 8, 2021 Share Posted May 8, 2021 Those tyres are shocking, they look like something off an early Ertl toy. 2 Quote Link to comment Share on other sites More sharing options...
robbo Posted May 16, 2021 Author Share Posted May 16, 2021 Limited edition set from Poppema Agricultural Miniatures https://www.poppemalandbouwminiaturen.nl/Universal-Hobbies-UHMFset-MF-set-MF-675-4WD-amp-MF-690-2WD-132-limed-750-stuks-PRE-ORDER-leverbaar-in-augustus-gemaakt-iov-Poppema-Landbouwminiaturen-prijs-is-voor-de-set-beide-modellen-komen-in-1-verpakking/?fbclid=IwAR1S3QD7KGlS-YeLSapiZqA3vVj3qkzN1ZvNH48E9zJ93k61LGadjiurCRA Massey Ferguson 675 4WD and Massey Ferguson 690 2WD. I don't wish to be critical but I would have thought that it would have been better for the 675 to be the 2 wheel drive version and the 690 to be the 4 wheeler, having said that, I will probably order the set 1 Quote Link to comment Share on other sites More sharing options...
8feetmower Posted May 16, 2021 Share Posted May 16, 2021 675 2wd & 690 4wd already been done.This way it's different versions. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 16, 2021 Share Posted May 16, 2021 like to see the box first ,see if its dealer or what ever, have a 2wd 690 already anyway, plus the origonals in dealer boxes as well, so may not bother, will see Quote Link to comment Share on other sites More sharing options...
WHITESNAKE01 Posted May 16, 2021 Share Posted May 16, 2021 3 hours ago, robbo said: Limited edition set from Poppema Agricultural Miniatures https://www.poppemalandbouwminiaturen.nl/Universal-Hobbies-UHMFset-MF-set-MF-675-4WD-amp-MF-690-2WD-132-limed-750-stuks-PRE-ORDER-leverbaar-in-augustus-gemaakt-iov-Poppema-Landbouwminiaturen-prijs-is-voor-de-set-beide-modellen-komen-in-1-verpakking/?fbclid=IwAR1S3QD7KGlS-YeLSapiZqA3vVj3qkzN1ZvNH48E9zJ93k61LGadjiurCRA Massey Ferguson 675 4WD and Massey Ferguson 690 2WD. I don't wish to be critical but I would have thought that it would have been better for the 675 to be the 2 wheel drive version and the 690 to be the 4 wheeler, having said that, I will probably order the set Hi all, Visited this supplier, my "regular one", yesterday, and immediately ordered this set. I know this guy quite some years now, and what he brings out, is mostly perfect!!! Best regards, Jan Quote Link to comment Share on other sites More sharing options...
justy 46 Posted May 16, 2021 Share Posted May 16, 2021 I bet a MF 300 Series set will be next. Covid has UH repeating models from a few years back. I have the 675 2wd... So don't think I will get this set anyway. I spose the Ford 7710 and 7910 are a no go now. Its been 3 years since they were announced. Pie in sky I'd say.. Quote Link to comment Share on other sites More sharing options...
chris.watson Posted May 16, 2021 Share Posted May 16, 2021 2 hours ago, justy 46 said: I bet a MF 300 Series set will be next. Covid has UH repeating models from a few years back. I have the 675 2wd... So don't think I will get this set anyway. I spose the Ford 7710 and 7910 are a no go now. Its been 3 years since they were announced. Pie in sky I'd say.. They will come mate, look how long we all waited for the case 1494, 5 years I think it was. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 16, 2021 Share Posted May 16, 2021 2 hours ago, justy 46 said: I bet a MF 300 Series set will be next. Covid has UH repeating models from a few years back. I have the 675 2wd... So don't think I will get this set anyway. I spose the Ford 7710 and 7910 are a no go now. Its been 3 years since they were announced. Pie in sky I'd say.. i recon as chris said that they will arrive,and yes maybe the 300 set as well. if not a re run of them,and the 6290’s ,sadly right now,most company are in a cash short environment, little free cash to spend on new tooling like the fords or tx combine , no ability to visit the real ones for final measurements , but they will proceed as they will have invested cash already on them, prob why they are happy to do re runs and limited like this, easy minimal outlay as they have all the toolings ,no design work needed ect,in return they max profit it. Quote Link to comment Share on other sites More sharing options...
justy 46 Posted May 16, 2021 Share Posted May 16, 2021 Well.. I hope ye are right guys. I will keep the fingers crossed for another while. 2 Quote Link to comment Share on other sites More sharing options...
AndyB Posted June 3, 2021 Share Posted June 3, 2021 Just recieved a batch of the MF 8S.265s and they have a trailer hitch of sorts on now😉 1 Quote Link to comment Share on other sites More sharing options...
Pete132 Posted June 3, 2021 Share Posted June 3, 2021 36 minutes ago, AndyB said: Just recieved a batch of the MF 8S.265s and they have a trailer hitch of sorts on now😉 tyres look chunky! Quote Link to comment Share on other sites More sharing options...
robbo Posted June 5, 2021 Author Share Posted June 5, 2021 It's looking like the Dexta model will be available soon, Poppemaminituren are saying that they should be in stock shortly 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted June 5, 2021 Share Posted June 5, 2021 5 minutes ago, robbo said: It's looking like the Dexta model will be available soon, Poppemaminituren are saying that they should be in stock shortly sweet,our limited blue white ones should be with us soon then . 1 Quote Link to comment Share on other sites More sharing options...
CX820Joe Posted July 27, 2021 Share Posted July 27, 2021 Seen on Toys Farm Facebook page, new version of Fendt 818 Vario with wide tyres, ltd/Ed of 999. Quote Link to comment Share on other sites More sharing options...
Barry Posted July 27, 2021 Share Posted July 27, 2021 And the Fendt 820 Ltd ED 999 aswell Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.