Teagle Super-Ted 221 wuffler in 1/32 scale

[Cornish-model-farm]

I have finally got around to doing the renders for the Teagle Super-Ted tedder/wuffler, see pictures below. Test print coming shortly.

[Cornish-model-farm]

This is the real machine

[Jack390]

I was just thinking about one of these the other day after seeing our neighbours barley straw get wet. They turned it with a 390T and a single rotor rake. Will be following this with interest 

[Cornish-model-farm]

11 hours ago, Jack390 said:

I was just thinking about one of these the other day after seeing our neighbours barley straw get wet. They turned it with a 390T and a single rotor rake. Will be following this with interest 

Many thanks Jack, yes, very good for fluffing up straw - a bit like the old Bamford Wuffler.👍

[Cornish-model-farm]

Test print completed. A few tweaks required, but on the whole very pleased with the result.

[Jack390]

Looking good, the tines have come out really well. 

[Cornish-model-farm]

14 minutes ago, Jack390 said:

Looking good, the tines have come out really well. 

Yes, better than expected, but they are quite delicate. I may need to thicken them up a bit.

[Cornish-model-farm]

I am re-printing the rear gates for the Super-ted as I wasn't happy with them. In the meantime I have painted and decaled the model I printed the other day, minus gates. See pictures below.

[Jack390]

Looking great, will you be selling a few of these as I’d  be interested?

[Cornish-model-farm]

4 minutes ago, Jack390 said:

Looking great, will you be selling a few of these as I’d  be interested?

Yes, definitely. The kits will be available at the end of August. I still have to work out the unit price too.

[ginjaninja95]

Are you printing in one piece? If so  how do you paint such clean lines?

[Cornish-model-farm]

On 8/19/2024 at 12:21 AM, ginjaninja95 said:

Are you printing in one piece? If so  how do you paint such clean lines?

Most of it is one piece. I just have a quite steady hand!

[Cornish-model-farm]

A couple more pictures of the Super-ted, this time with the rear gates attached. The gates are not hinged but can be glued in the fully open or fully closed position, or anywhere in between! Please note the tine reel is very fiddly to assemble. The real machine has 8 tine bars but I have cut  it down to 6 and it is still fiddly fitting all 6 bars onto the circular drum ends. The tines are very delicate and can break off if too much force is used during assembly. If that hasn't put you off, I am selling the kits for £20 each including postage. The kits will be available in two weeks time and will include a full set of decals.  Please message me if interested.

[trigger82]

On 9/8/2024 at 4:39 PM, Cornish-model-farm said:

A couple more pictures of the Super-ted, this time with the rear gates attached. The gates are not hinged but can be glued in the fully open or fully closed position, or anywhere in between! Please note the tine reel is very fiddly to assemble. The real machine has 8 tine bars but I have cut  it down to 6 and it is still fiddly fitting all 6 bars onto the circular drum ends. The tines are very delicate and can break off if too much force is used during assembly. If that hasn't put you off, I am selling the kits for £20 each including postage. The kits will be available in two weeks time and will include a full set of decals.  Please message me if interested.

I be interested in them 

[Cornish-model-farm]

32 minutes ago, trigger82 said:

I be interested in them 

Not sure about postage to RoI Cyril, but will look into it.

[Cornish-model-farm]

Just got some feedback from Teagle Machinery Ltd. They think the models are great and they will be sharing the pictures on their social media in due course.