nick henton Posted January 1, 2011 Author Share Posted January 1, 2011 Great start to the new building, i would use the enclosed bit as a workshop the your farm workers can repair the machinery in the dry. As for the trailer with the Massey, get another one behind it and make it really grunt!!!! Thanks Markduck the massey will be busy stone carting when i come to lay the yard so we will see what she is made of then ;D Regards Nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 1, 2011 Author Share Posted January 1, 2011 A wise choice you've made there Nick... one of the best models of 2010 in my opinion... you need an LCN version next mate I must admit marky its one of my favourits and will go nicely with the FORTIA.it was a toss up between that one and the britains one i still need a little persuasion on that. Im waiting for the 8 wheel version that siku are bringing out in the spring, and the LCN version is on my list for 2011. Ive decided to run 3 different makes on fen farm mainly massey JD and Fendt :of Regards Nick Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 2, 2011 Share Posted January 2, 2011 It is a big trailer paul but for the tractor of that size it will just be a walk in the park i think im right in saying 320hp i also have the big red Krampe one that siku did a few years back for the silage season ;D Regards Nick no nick,my attempt at being funny,they are matched well together Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 2, 2011 Author Share Posted January 2, 2011 I know Mate it was Late last night i want a bigger trailer to go behind it ;D Regards Nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 2, 2011 Author Share Posted January 2, 2011 Ive Been stoning the yard today putting the new massey to work Down to the digger for a load Nearly full Back a little....... WOH Tipping Leveling out Just needs the roller now Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 2, 2011 Author Share Posted January 2, 2011 also got the other half to get her artisic side out the new shed Another more to follow soon any comments welcome Regards Nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 Hi all ive finally managed to get some more done to my layout ive layed the concrete for the machinery Mandys gates got them fixed in place but then realised they wouldnt open and close properly where i had put them The reason why when i put the roadway down so had to move them Another ive just got some more to do yet Ive got the grain shed in place i need to get some doors on it but am unsure what sort of doors to do I have got the yard all stoned as well with a little help from some tile adhesive any comments welcome as usuall Regards Nick Quote Link to comment Share on other sites More sharing options...
AlexMF Posted January 26, 2011 Share Posted January 26, 2011 it's coming along well now mate keep at it! Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 Thanks mate i will certainly keep on at it ;) Regards Nick Quote Link to comment Share on other sites More sharing options...
Farmermilkin82.050 Posted January 26, 2011 Share Posted January 26, 2011 Thats looking really well Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 Thats looking really well Thanks James ;) Quote Link to comment Share on other sites More sharing options...
Farmermilkin82.050 Posted January 26, 2011 Share Posted January 26, 2011 what did you use for the pass/road ??? Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 I used some old Scalextric track that i had spare then i covered it with some black rubber material not sure what its called but i got it from my old place of work Regards Nick Quote Link to comment Share on other sites More sharing options...
Farmermilkin82.050 Posted January 26, 2011 Share Posted January 26, 2011 And finally, what did you use for the pebbles/stones or what are they??? Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 And finally, what did you use for the pebbles/stones or what are they??? Its a mix between clumping and non-clumping cat litter stuck in place by some tile adhesive applied very generously then pushed in using a flat block of wood i used the same for the "concrete" for the machinery Hope this helps mate Regards Nick Quote Link to comment Share on other sites More sharing options...
Light Land Posted January 26, 2011 Share Posted January 26, 2011 hell of an under taking there Nick,looks well. Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 26, 2011 Author Share Posted January 26, 2011 hell of an under taking there Nick,looks well. Thanks Ol theres still plenty more to do im going to start outlining the fields ect. so plenty to keep me out of trouble :laugh: Regards Nick Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 27, 2011 Share Posted January 27, 2011 looking good nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted January 27, 2011 Author Share Posted January 27, 2011 looking good nick Cheers Paul Quote Link to comment Share on other sites More sharing options...
nick henton Posted February 2, 2011 Author Share Posted February 2, 2011 Hi all Just a small update on fen farm ive nearly got the base boards together just a small gap to fill now ive also built a clamp just got to add some colour to it now Another comments welcome Regards Nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted February 26, 2011 Author Share Posted February 26, 2011 Hi all just a small update on fen farm gone has the grain dryer i have decided to go with the grain silos ive only laid them out at the moment still got some work to do on them the tipping shed another finally got the farm master back from the dealer I wanted a drawbar fitted this is the result Finally managed to get the clamp painted Quote Link to comment Share on other sites More sharing options...
nick henton Posted February 26, 2011 Author Share Posted February 26, 2011 I have also got another shed for the animals im going to go with a beef herd i think thier shelter is nearly finished any comments welcome as usuall Regards Nick Quote Link to comment Share on other sites More sharing options...
nick henton Posted February 26, 2011 Author Share Posted February 26, 2011 Sorry wrong picture :of Regards Nick Quote Link to comment Share on other sites More sharing options...
Claaspower Posted February 26, 2011 Share Posted February 26, 2011 Looking well so far 8) What width is the Clamp you made,just I have one myself 14" wide and I'm thinking now it's going to take some grass to fill it Quote Link to comment Share on other sites More sharing options...
tractorbob Posted February 26, 2011 Share Posted February 26, 2011 nice clamp ,i bought 2 from george poole Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.