BK741 Posted July 19, 2018 Author Share Posted July 19, 2018 MT1035T LSU front hub seal replacement Link to comment Share on other sites More sharing options...
BK741 Posted July 19, 2018 Author Share Posted July 19, 2018 MLT 741-120lsu removing transmission Link to comment Share on other sites More sharing options...
BK741 Posted July 23, 2018 Author Share Posted July 23, 2018 DF Agrotron 135MK3 with overheating problems. Link to comment Share on other sites More sharing options...
BK741 Posted July 25, 2018 Author Share Posted July 25, 2018 Removing radiator Link to comment Share on other sites More sharing options...
BK741 Posted July 26, 2018 Author Share Posted July 26, 2018 Ford 5610 and Challenger Link to comment Share on other sites More sharing options...
BK741 Posted July 26, 2018 Author Share Posted July 26, 2018 Big old CAT D8 Link to comment Share on other sites More sharing options...
BK741 Posted July 27, 2018 Author Share Posted July 27, 2018 New Holland T7 and McHale tripples Link to comment Share on other sites More sharing options...
BK741 Posted July 29, 2018 Author Share Posted July 29, 2018 New Holland T7.200 missing 1 to 6th gear tested and suspect Slow clutch pack fault. First job remove cab and a lot of pipe work under it Link to comment Share on other sites More sharing options...
BK741 Posted July 30, 2018 Author Share Posted July 30, 2018 Gearbox removed and strip down begins Link to comment Share on other sites More sharing options...
tractorman314 Posted July 30, 2018 Share Posted July 30, 2018 This looks to be a big job before you even get to the Gearbox, will this be warranty or will customer be paying. I don't think i would like to be receiving the BILL. tractorman314. Link to comment Share on other sites More sharing options...
BK741 Posted July 31, 2018 Author Share Posted July 31, 2018 23 hours ago, tractorman314 said: This looks to be a big job before you even get to the Gearbox, will this be warranty or will customer be paying. I don't think i would like to be receiving the BILL. tractorman314. The tractor is a 2013 build so well out of warranty. Parts aren't too expensive but labour is going to a killer Link to comment Share on other sites More sharing options...
BK741 Posted August 5, 2018 Author Share Posted August 5, 2018 Clutch S stripped down on the bench. Clutch plates found to be burnt and starting to bevel with heat of the slipping clutch pack Link to comment Share on other sites More sharing options...
BK741 Posted August 5, 2018 Author Share Posted August 5, 2018 You wait for one Amazon Pantera to turn up then two arrive! Link to comment Share on other sites More sharing options...
BK741 Posted August 8, 2018 Author Share Posted August 8, 2018 T7 back together and running up on dyno. She had 202HP at the shaft un boosted so maybe 240HP on boost not bad for a 200HP T7. Its got a Steinbauer box on it. Might be a cheap way for more power in the short term but be aware of expensive bills in the future. Link to comment Share on other sites More sharing options...
BK741 Posted August 12, 2018 Author Share Posted August 12, 2018 New T6.145 and T7 having its 4wd centre bearing changed Link to comment Share on other sites More sharing options...
BK741 Posted August 15, 2018 Author Share Posted August 15, 2018 TD in for clutch. Spotted this big Merlo Link to comment Share on other sites More sharing options...
BK741 Posted August 19, 2018 Author Share Posted August 19, 2018 MLT 840 front wheel bearing collasped Link to comment Share on other sites More sharing options...
BK741 Posted September 11, 2018 Author Share Posted September 11, 2018 Big Class and MLT 625 and MRT Link to comment Share on other sites More sharing options...
BK741 Posted September 28, 2018 Author Share Posted September 28, 2018 MF and Parra plow Link to comment Share on other sites More sharing options...
BK741 Posted October 3, 2018 Author Share Posted October 3, 2018 Nuffield and IH Link to comment Share on other sites More sharing options...
BK741 Posted October 3, 2018 Author Share Posted October 3, 2018 MT 1335 Link to comment Share on other sites More sharing options...
BK741 Posted October 5, 2018 Author Share Posted October 5, 2018 Was called out to this Iseki TG compact tractor that had spluttered to a stop and wouldn't start but was back firing though the inlet manifold. Checked fuel etc then removed the rocker cover to find bent push rods. Removed head expecting to find a dropped valve and damaged cylinder. All looked ok. Recovered back to the workshop Link to comment Share on other sites More sharing options...
BK741 Posted October 5, 2018 Author Share Posted October 5, 2018 Pushed into the workshop and removed the timing cover to find the crank gear damaged and damage to idler and fuel infection pump gear Head stripped and valves checked. Link to comment Share on other sites More sharing options...
BK741 Posted February 15, 2019 Author Share Posted February 15, 2019 FR engine removal. Link to comment Share on other sites More sharing options...
BK741 Posted February 15, 2019 Author Share Posted February 15, 2019 Moon rise over MLT 737 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.