JoshParkinson

Good photos Cerin, i'm guessing one of the tank flaps fell down on the TX64, the same thing has happened on ours a couple of times this season

How about a circular pencil sprayed in the proper colour??

That's a good idea, although it's done now so i think i'm just going to leave it really, i'll get the roll bar made up at some point then i'll have another look and i might use a pencil not sure though

Cheers, and the exhaust was the only thing i have, and i know about the wheels i've already thought about that, i'm suprised nobody has picked up on the roll bar yet, i completely forgot 

Cheers Andy

Here it is.

Agree with Tris on the 7530, although i think it would have to be the John Deere 6920s powerquad changing up through the shifts under load. Our T7050 sounds pretty nice too.

I would say i have a set of britains rams but i cut them up this afternoon for something else 

Looking good mate! I'm just getting some plastruct ordered myself, going to have a go at a veg planter  i look forward to seeing how your trailer progresses. What are you using for rams? And how are you going to hinge it at the back?

This isn't quite a conversion but i've made myself a little heat chamber so that when i am spraying in cold conditions i can put it in there and switch the light on, the light is a 100 watt bulb and lets out a fair bit of heat to dry the paint slightly quicker, i used it today on my 7930 bonnet and was very impressed with the finish after just an hour or so in there.

With the perspex over the front to stop the heat escaping.

Done a bit more today, wish i had put a bigger set of wheels on it as it sits a bit low to the ground but never mind, then i have resprayed the bonnet (thanks to blt for the 7930 bonnet) and put the stack on it.

Cheeeeeeeeeeeeeeeers 

No worries mate, i'll get one soon as.

Looks like he tried to reverse under a low bridge 

Ahh cool. Well a tunnel i don't know whether you would be familiar with them  but they run down the centre of a grain store, you can walk either on top of it or inside it hence the name of a tunnel, then there are small outlets all the way down each side which you attach a sort of piping to called ducting and then you tip grain on top of the ducting, then you blow hot air down the tunnel and it goes out of these outlets to dry the grain, you might have seen one before but if not i will get a picture when i am at work next.

That looks awesome mate! if you put a tunnel inside that and painted it grey that would be just like one of our grain stores, but it still looks excellent as a workshop and i like the little tool chest, is this going in a layout?

Sensitive teeth, those sweets i bought last night were the most painful £1.99 i've ever spent!

It's still on the Saint Guthlacs site Andy, don't know if you've heard about St. Guthlacs/George Farmer merging? But anyway i'm still on the same site but it's now under a different name with different management etc, most of the teachers have left due to the fact their contract was 'site based' so when the site closes in 2014 to move to holbeach they will be left with no jobs, so i'm not quite sure what to expect yet  \

Flatlift i reckon, due to the packer roller and you were asking about simba solo tines the other day, 2+2 = flatlift.

Holding the tailboard shut on the beet trailers when on short journeys 

on the loadall because the spring loading has gone in the throttle, we use a spring tied to a bit of baler twine tied round the steering column

tying sheets down on trailers

holding doors/gates shut

next time i'm at work i'll have a good look round 

A FARM FORCE ULTRA-TILTH WITH STOCKS AG RAPE SEEDER! I wish....

A flatlift?

Sumo trio?

Has anybody got the blackberry curve? I've heard mixed stories about these but quite like them 

Ahh this is a handy topic, considering my contract is due to run out next month.

Bit of an update.

I recently got this belt off ebay.

Then had a bit of a change around (don't ask about the Lexion 600 i will explain further down the post.)

Re-organised my literature into folders so it's slightly easier to find the series i want.

And then finally, i've put the lexion 600 and 8330 in place to represent Siku's T670i and 8360R which i am going to put into a diorama like this and put in that place, it's just a slightly different way of displaying and since i'm going to also have britains' 8360R, i can display the britains one and have the siku one in the diorama.

Just looks like a decal change from a 960 to a 980 to me Paul 

Went and fetched my school uniform today ready to start at the new school, don't quite know what to expect yet.