towse trading

more

agri tracs on a lexion dave

it took 2 goes , spun a resin wheel i had here down on the lathe and cut the sprockets but was not quite right but 2nd one worked ok dave

might sell these in the future , dave

hi these take a bit of fitting as i have left a lump of resin on the back so it can be shaped to fit other stub axles or flat chassis ( siku) , not sure on price as this is the first set i have done, i will try another fitting this weekend to see if it will work on other items. dave

hi i made a set of agritracs today , they will turn but are stiff , cast hub & sprocket , jd front runners, tractor sits a little high? dave

hi these fit straight on the axle so it can be made a little wider , might sell the units in there own ,but you can email any requests , dave

HI JASON YES BONDED FINE , MIGHT MAKE NEXT ONE 1 LINK TIGHTER DAVE

.

HI THERE IS ALOT OF TALK ABOUT QUADTRAC'S SO I HAVE BUILD MY OWN, CAST RUNNERS & JD TRACS DAVE

.

FINISHED THE 2ND ONE, DON'T KNOW WHICH I PREFER DAVE

YES , NICE TO BUILD SOMETHING ELSE AFTER THESE WERE FINISHED. DAVE

HI I HAVE SEEN A 8 ROW, THOUGH OF 6 BUT I THOUGH 8 WOULD LOOK BETTER ,NOT SURE ON PRICE YET ( ?25 - ?30 MARK)

HI I HAVE CAST THE BODY PARTS SO IT COULD BE MADE BIGGER WITH A NEW FRAME , JUST TIME TO TRY NEW IDEAS , IT WILL DO FOR NOW , ANY COLOUR COULD BE DONE, JUST BASED IT ON A STANHAY VERSION , BE ON THE WEB IN A WEEK OR SO. DAVE

HI I COULD NOT GET THE LAND WHEELS IN ,THE BELT PULLYS STUCK OUT TOO FAR, SO WILL CHANGE AROUND ABIT TO GET THEM IN ON THE NEXT ONE I HOPE. DAVE

HI YES , THE 50 WERE BAD ENOUGH , 100 FRONT WHEELS ,100 REAR , 50 CABS & ROOFS +ALL OTHER PARTS, ALL ADD UP TO ALOT OF PARTS TO PAINT , BUT I WAS GLAD TO HAVE BEEN CHOSEN TO BUILD THEM , DAVE

FINISHED THE 8 ROW BEET DRILL (MK 1 ) , WILL MAKE SOME CHANGES TO THE NEXT ONE , NOT 100% HAPPY WITH IT. DAVE

THE 3 I HAVE ( GOLD , BLUE & THE PROTO I SHOWED ON THE TALK BOARD)

HI THE BLUE WERE LTD TO 50 ( CERTS. 1-50 ) , GOLD LTD TO 4 ONLY (CERTS 1-4) DAVE

hi the forum tractors were metal cabs , they were all to be painted so it did not matter if it was resin or metal, but kept them all the same as the proto type , all 54 of them ! dave

hi i have 3, cheap makes , lasted me well , one on flat sanding , 1 drum sanding (corse work) , and one with a 2.5 mm drill ( great for holes and as a router bit for cutting plastic or on its side to sand/cut a flat side) 2 are 12v , 1 x 250v on flexi shaft . dave

not on due to copy rights , dave

more

hi just finished this 7740 on a uh valtrc c chassis , siku linkage, britains parts dave