towse trading

HI

I COULD NOT GET THE LAND WHEELS IN ,THE BELT PULLYS STUCK OUT TOO FAR, SO WILL CHANGE AROUND ABIT TO GET THEM IN ON THE NEXT ONE I HOPE.

DAVE

HI

YES , THE 50 WERE BAD ENOUGH  , 100 FRONT WHEELS ,100 REAR , 50 CABS & ROOFS +ALL OTHER PARTS,  ALL ADD UP TO ALOT OF PARTS TO PAINT , BUT I WAS GLAD TO HAVE BEEN CHOSEN TO BUILD THEM ,

DAVE

FINISHED THE 8 ROW BEET DRILL (MK 1 ) , WILL MAKE SOME CHANGES TO THE NEXT ONE , NOT 100% HAPPY WITH IT.

DAVE

THE 3 I HAVE ( GOLD , BLUE & THE PROTO I SHOWED ON THE TALK BOARD)

HI THE BLUE WERE LTD TO 50 ( CERTS. 1-50 ) , GOLD LTD TO 4 ONLY (CERTS 1-4)

DAVE

hi

the forum tractors were metal cabs , they were all to be painted so it did not matter if it was resin or metal, but kept them all the same as the proto type , all 54 of them !

dave

hi

i have 3, cheap makes , lasted me well , one on flat sanding , 1 drum sanding (corse work) , and one with a 2.5 mm drill ( great for holes and as a router bit for cutting plastic or on its side to sand/cut a flat side) 2 are 12v , 1 x 250v on flexi shaft .

dave

Yeah, the ones with the blue cabs had the NH leaf logo. I presume it was just left out as this is a prototype

not on due to copy rights ,

dave

more

hi

just finished this 7740 on a uh valtrc c chassis , siku linkage, britains parts

dave

hi

i use some wire cutters behind the rim and center axle to move it a bit , then some flat nose plyers on the stud on the out side to twist it off , they are very hard .

dave

heres a pic of the guts of the fendt rc , the plugs and sockets look like extra lights

dave

sunflower hearts ?1.10 a bag full

dave

I've just sent him a whopping gret order, best add that to it too Dave ;D. That would look superb on a JCB farm master any plans for one ???

hi

it is a bit small for the farm master, the first one i did for the farm master but it did not look right for it

dave

how much!!!!! ;D

GOING TO BE ?10 EACH

DAVE

MORE

HI

MADE THIS TODAY , FITS THE NEW SIKU LOADERS

DAVE

made this today

just a idea i had  , rotovator a bit wide but it was all i had

dave

hi

i made the 2 plates in resin , one so it can be fitted to the britains to take the siku buckets when they come out and one to make other buckets fit the siku loaders,

dave

it should work ok, the pipe is held by the tank so no other brackets needed.

dave

hi

the front tyres & rims are tim , the rear center is tim with the jd insert fitted, the rear tyre is fendt on the tim rim.

dave

4 mtr front mounted power harrow

dave

as jason asked for it here it is , not ready for a month just too busy at the moment , britains based , with resin bonnet floor and cab, this is the proto type version ,

hi

yes still same price ?45 + p&p , might show the avatar pic

dave

one more