CJ Posted November 25, 2007 Share Posted November 25, 2007 need a bit of help removeing the front axle from the uh deutz ttv for a transplant and also whats the best colour to use for claas green thanks Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted November 25, 2007 Share Posted November 25, 2007 the duetz is one of the eraly uh models so its joined chassis wise like the old britains ones are, strip the bodywork off, the prise the chassis in half ,go for the front end anyway so the axel drops out Quote Link to comment Share on other sites More sharing options...
TM190 Posted November 25, 2007 Share Posted November 25, 2007 CJ I Use Halfords, "Rover Applejack" for Claas Green ;) Quote Link to comment Share on other sites More sharing options...
CJ Posted November 25, 2007 Author Share Posted November 25, 2007 the duetz is one of the eraly uh models so its joined chassis wise like the old britains ones are, strip the bodywork off, the prise the chassis in half ,go for the front end anyway so the axel drops out cheers sean thats was a big help thanks CJ I Use Halfords, "Rover Applejack" for Claas Green ;) cheers blake Quote Link to comment Share on other sites More sharing options...
Fenside MF Posted December 6, 2007 Share Posted December 6, 2007 I just recieved the ttv through the the post today (my first uh model),I had intended to use the chassis for a case but cannot bring myself to take apart this lovely model, so could anyone please tell me is it possible to remove the wheels and is it easy without causing much damage Quote Link to comment Share on other sites More sharing options...
alpinefocus Posted December 6, 2007 Share Posted December 6, 2007 rear wheels just come apart by twisting them in opposite directions and the fronts are keyed in by the black centres, carefully pull them out and the fronts fall off Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted December 6, 2007 Share Posted December 6, 2007 I just recieved the ttv through the the post today (my first uh model),I had intended to use the chassis for a case but cannot bring myself to take apart this lovely model, so could anyone please tell me is it possible to remove the wheels and is it easy without causing much damage the rears will just pull off, easy as, the fronts are simple to, use a pair of small pliers and pull the black hubs out ,these are pin like and hold the wheels on, unlike the later uh models which are screwed on and the hubs hide that, just make sure you pull the pins straight otherwise the ends snap off if you have an angle Quote Link to comment Share on other sites More sharing options...
Fenside MF Posted December 6, 2007 Share Posted December 6, 2007 Thanks lads Quote Link to comment Share on other sites More sharing options...
Question
CJ
need a bit of help removeing the front axle from the uh deutz ttv for a transplant and also whats the best colour to use for claas green thanks
Link to comment
Share on other sites
7 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.