Paul Palmer

Yes removed the 0 Sean, ive tried loads of combinations,i have emailed them so hope they reply

Typical its not listed on ebay🤦‍♂️

Ok will see if its listed on there,thankyou

Cheers Hugh tried that. , ive tried every variant going, bit of advice from spn to email them

I am trying to order something from univers mini but eveytime i go to checkout it says my mobile number is incorrect and needs to be reformatted? I have tried the 44 before my mobile number and +44 without my first xero,also just my mobile with the zero,what am i doing wrong please

😂😂They must pivot on something

Possibly the uh linkage is screwed in Joe

Wouldnt the marge 3 point rear linkage fit Joe if you could take off the britains type hitch?

Fingers crossed Joe

What are the front links like Joe, do they actually hold anything up?

So are the front links permanately in the up position Phil?

I got my wheels from Hugh, jd driver, perhaps he has some

And my T6.180 with T5.130 wheels and tyres, noticed i havent painted the rear wheel centres yet Joe

Also wheels and tyres from a T5.130 do it and i have also used T7.210 wheels on a T7.165S with the T7.165S tyres

Yes Joe, i used a set of wheels off a uh T7.210 and used the tyres from the T.6

Seems everybody on here that has bought the T7.300 has weak front links

Sent mine back Stan, front links were really loose and im not messing about glueing or tightening screws, if replacement is the same then i will not be getting another

Just got this britains NH telehandler, spares and repair listing, i got it for the tyres to put on my britains jcb 542-70 telehandler,dont like the ones on the jcb

Ordered some hedges from brushwood toys which came today and they kindly popped in a britains 2024 catalogue

3mm hardboard up ready for the background scenery to be added

Had a rethink and this is what i came up with, no adding an extra piece of wood to the base as it would have slightly covered the top drawer of my desk so i just made the shed a bit smaller depth wise, just need a bit more hedging to go in and a gate or possibly 2 gates, its still not ideal put thats the space i have and i want to keep the desk clear

👍

Thanks Stan, does the marge weight fit?

Did you print the weights Stan?

This is an overall picture,so now i will add the piece as in the posts above by using dowells and then add a sheet of hardboard over the desk to form a field which can be removeable so i still have the desk to work on