nathan

added some more today, new pages and some more models. 

looking forward to getting mine should have them this week i was told today. wish it had the other rear wings on it \

chelsea winning tonight ;D

Cut the first one near the oil filter, the second one near the oil filter and about 1cm forward (so you are cutting out the centre of the engine) the fit the second piece in between the two first pieces, repeat on the other side.

oh i see now thanks for the picture showing it too

front wheels look a tad big mate  \ other than that looks fine

small wheels needed then you would be there mate

what a great model you have there where abouts do you cut the 2 engines, 

rear wheels off

drill out rivets one on bonnet 2 under rear wing exhaust side

take off decals if you want to save them

take a screw driver and carefully split and wiggle roof loose

think thats it

what a great model PDC   

when its all up and running will you be selling any conversion stuff???

no convertion models will be on it, just parts for people to do convertion's , a friend of mine has asked about selling his on the site, but when i do shows like westpoint in exeter i might let him sell them on the table so people can see it in the flesh so they know what they are buying.

if its convertions you want there are plenty of people on the forum that could sort you out mate.

it's definatly fixed in myin! i found out the hard way  :D

being abit heavy handed i used to break a lot of the UH models but now i know better  :D

the rear wheels do wobble a bit don't they do think its a step in the right direction) i think it will be one of those models that gets chopped for conversions or robbed for parts

good work mate , i do like these weathered look models ,

for the spot lights i would see if anybody has any UH models that they done a convertion and have the cabs and rear wings say on a deutz TTV and cut them off and use them, thats what i have done in the passed 

karen harris had a load in there linkages tub at toytrac think they were about £7 each

www.farmmodels.co.uk

is there website but i don't think they have them listed on it so give them a ring.

i do a few parts and if i had some they would have to be a bit more than that. as i would have to break it up and work out prices on the parts to make my money back on the tractor.

have taken the under construction off the front page as people might think you can't order yet. i,ve put it on the pages that are under construction.

Forgot to say that there will be FTF members discount on the site prices, so if someone wishes to make a order don't forget to tell us your FTF members name,

if its the A frame front linkage you need, why not cut the A part from the front of the siku linkage and make it fit onto the 818 linkage if that makes any sence  \

if its the pic with a few fiats in they are deutz TTV wheels

cheers  lads for the feed back done some more today

cheers guys  thanks for the coments   will be adding the UH1 1/6 stuff tonight and another item for norscot, the siku rep told not to put there stuff on there yet as prices are going up in january so would have to change it all again, so thats why its not on there yet.

Nice website mate.

thank you mate 

nice start nathan,it is looking good so far

cheers mate

Looking good Nathan. As well as shows are you going to attend the toy fairs as well like Westpoint in Exeter? I'm in contact with several local show and rally organisers down this part so If you want any dates/details I'll PM or email them to you as and when. Like you say, early days and you have to start somewhere. We will all try to help out I'm sure. The very best of luck with it.

cheers for that, that info about shows would be great to have mate will pm you soon mate thats for sure.

landini power master

inside

it has a good dash display ,lots of hand controls on it.it has blue seats , the passenger seat is in the folded down position

the outside

has some good detail . at the rear its the  standard linkage with a fixed top link. on the cab theres an ariel, rear wiper,a spotlight on each side , number plate back on the left side.at tha front theres the mirrors which are i think one of the best from UH, 1 beacon, tool box above the fuel tank, warning decal on the tank too. the wheels are very good and one point i like about it is no fixed rear axle which i think is the first for UH but i could be wrong on that?. the one thing that lets this model down is no front linkage . if it had these i think it would out sell the TTv for the people who do the convertions i would think. but they will be doing the landini in a set with the front fella mower so that will have front linkage

will give it a 8 1/2 out of 10 

hi chaps, i have started my own website. its very basic at the mo but you have to start somewhere i guess. its not 100% finished yet. at the moment UH & norscot are done . britains and siku will be coming in the new year at some point. any feed back would be great. 

www.westcountryfarmmodels.co.uk

so over all, worth the  money???

its great for the money and a good model to add to any collection

i would give it 9 1/2 out of 10 ( 1/2 knocked off for the fixed rear axle )