Old Ford Posted October 10, 2006 Author Share Posted October 10, 2006 thanks guys ;D i did make a slight twist in it, to give it that used look ;). what distance apart should the divideing bars be guys for cows and sheep ??? . also the hight for cows and sheep ??? . help would be gratefully received. :) Quote Link to comment Share on other sites More sharing options...
THEBRITFARMER Posted October 10, 2006 Share Posted October 10, 2006 Hi Mark I found a feeder on the net 1/16th scale. The total height is 3.25" x 6" diam. The slot openings are 1" They also had a horse feeder 2.75" x 6" diam slot openings 3/4" All you have to do is divide by 2 Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 10, 2006 Author Share Posted October 10, 2006 thanks scott. :) the first one looks very fancy Quote Link to comment Share on other sites More sharing options...
THEBRITFARMER Posted October 10, 2006 Share Posted October 10, 2006 thanks scott. :) the first one looks very fancy They do don't they.............I'll take 2 when you have them finished :D :D Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 10, 2006 Author Share Posted October 10, 2006 mmmmmmmmm :o : Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted October 10, 2006 Share Posted October 10, 2006 didnt you buy one from matey last year then mark? the one you posted the pics for, can't remember his name now Quote Link to comment Share on other sites More sharing options...
CJ Posted October 18, 2006 Share Posted October 18, 2006 is there any new pics coming old ford im gaggin to see some more Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 had a rumage in the stinging nettles around the farm, and found this old thing. :) Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted October 22, 2006 Share Posted October 22, 2006 what the sweet little fergy or the saw :D where did you get that from then mark Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 what the sweet little fergy or the saw :D where did you get that from then mark the saw Sean :D i would not leave a massey in the nettles. the 135 off ebay, the saw i just made. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted October 22, 2006 Share Posted October 22, 2006 just made eh,looks smart mate, still see loads of those arround down here in the forests of the small farms Quote Link to comment Share on other sites More sharing options...
CJ Posted October 22, 2006 Share Posted October 22, 2006 here you can come over and chop up my old fence posts if you want , thats a well made saw Old ford have you finished the parlour yet Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 thanks cj . no the parlours not finished yet, thats going to be a winter job. : Quote Link to comment Share on other sites More sharing options...
rich.new holland Posted October 22, 2006 Share Posted October 22, 2006 amazing the stuff you find in netlles looks good must of taken ages to cut out the bales on it Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 thanks rich, :) only took me about 15 mins to cut out the saw blade. Quote Link to comment Share on other sites More sharing options...
THEBRITFARMER Posted October 22, 2006 Share Posted October 22, 2006 YOU CUT THE NOTCHES ON THE BLADE Blimey I thought it was a piece from a farm implement you had used and then painted. You surely have the patience of a saint Mark and waaaaaaaaaaaaay to much time :D :D Once again FAB NOW get back up in the loft and get cracking on the parlour :D :D :D Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 Yes Scott i cut the teeth on the blade, not to hard its not 100% right but its ok. must carrry on with the parlour some time [ Quote Link to comment Share on other sites More sharing options...
graham Posted October 22, 2006 Share Posted October 22, 2006 Cracking little job. Quote Link to comment Share on other sites More sharing options...
Deere-est Posted October 22, 2006 Share Posted October 22, 2006 Blinding idea Mark!!! I got one of those discs loose somewhere, mind if I have a go somewhen? Thats a peach mate!! Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 thanks Graham and Tris, its not a discs Tris its a bit of white plastic card cut nearly round drill a small hole in the middle. then fit to the dremel , use sand paper to get it 100% round with the dremel on slow ish. then i cut four small holes in about 5mm to divide it in to four parts. then work out how many teeth you need, then drill small holes about 2mm from the edge. then cut out the shape of the teeth to the hole. :) Quote Link to comment Share on other sites More sharing options...
Deere-est Posted October 22, 2006 Share Posted October 22, 2006 But could you not just use a Dremel cutting disc? Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 i though of that tris but its a bit hard to get the saw teeth cut . unless you mean the saw type disc. ??? i've not had one of them. Quote Link to comment Share on other sites More sharing options...
Deere-est Posted October 22, 2006 Share Posted October 22, 2006 The cheapo B&***** one I had had wood cutting discs, when I took it back to change for the Dremel a couple must have fallen out and I still have them. . ... . somewhere,. . .. Quote Link to comment Share on other sites More sharing options...
Old Ford Posted October 22, 2006 Author Share Posted October 22, 2006 that sounds good. Quote Link to comment Share on other sites More sharing options...
Deere-est Posted October 22, 2006 Share Posted October 22, 2006 I'll see if I can find it and post a pic of the disc in the week. Got a few pages to catch up on before bed for now though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.