David Brown 1410 power!

Thanks every one!!! just an update i have taken the axle back off to make to new brakets as the other's left the tractor sitting high in the front ive also added steps to the cab and im now looking for a sutable material to make twin diesel tank's for it! so ive still got plenty of work to do! regards james

Ah yes john these were the later DB 1594/1694 these were in fact David Browns just badged as case's. i think looks good two and im happy with it. regards james.

Thanks i got the axle on now it looks ok.

No certinaly not actualy there queit commen ive seen loads!

a David Brown 1410/12 in 1/32!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks i will ;D

Thanks all! yes deerest im having fun along the way. through filling and shaping bits to fit the model ect.. im trying to get it as acurete as i can so it will take a while still to get done but it should be a good job when finnished! im learning a lot from doing this so any future builds such as a DB 1490 should be a lot quicker made as i will know what to do when it comes to shaping the model ect.. to get it acurate and right! regards james.

a little more work done on the cab and floor pan which as you can see i added the bar on the rear of the frame and the step up in the cab at the back! i also found a ford 5610 wide wheeled version yesterday which i thought i had lost ive not seen it for about 5 years.

Ya it looks like a 240 alright!

Hi Im just curious to find out information on the Massey ferguson 30 highway Turbo like how many were built was there different versions also turbod ect.. i seen one o these yesterday as a customer of ours drove his down to get bits for it! i found it unusual to see a little 3 cylinder tractor like it turbo charged??

Is that two 1/32 one's?? great job done on it!!

Great collection you have there!!! one of them fendts looks like a green fiat??? do you have the britains fendt 614 if not keep an eye on ebay they come up regulary!

Looks good so far!!!

Hi Im bringing up this topic once again as i need ideas for the axle bracket if i could be showen some pics of brakets already made to suit this axle it would be great! thanks! james

My father uses a 9/10 foot krone mower for all his mowing in the silage season and hes got excelent service out of it so he bought another one and when he was finnished with the old one he took of the condtioner and he uses it to mow hay weve also got a kuhn but its never seen any service yet as the krone never gives any trouble! the kuhn is a much bigger mower its a bit rediculas when it comes to moving along the road as theres a fair distance between the drawbar and tractor but i hear there a good mower! we orignaly used JF's but then bought a JD but i was told it was hard to turn with the type of linkage on the JD and i think he got a bit of trouble with it i forget as it was a long time ago!

Hi Matty i found these on ebay if your intrested there's kane stickers ect.. in with it! http://cgi.ebay.co.uk/britains-siku-conversion-stickyback-decals-A5-size_W0QQitemZ260215755754QQihZ016QQcategoryZ117196QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Oh right! i was told this loader was an orignal DB one but i dont know that much about the early red DB's

Beautifull!!!!!!!!! the loader fitted to the cropmaster is in fact an orignal David Brown built loader!

Looks superb matty! i must build one my self to!

Thank's! the bonnets of an ertl 2294 model! i made a front grill for the bonnet last night filled it out of perspex it looks good but still plenty of work! then im going to work on filling in the area where the exaust comes up through the side of the bonnet! im going to do a bit of cutting on the chassis as theres a bit to much under neeth! i got a JD 4020 2wd axle as well and i made a braket out of alluminum but it was ent long enough! if some one could show me detailed shots of brackets made to hold these axles idd be very thankfull!

You did an excelent job there FW!! a good spray job to!

Thanks all all coments are appreciated! My aim for this model is to use it on a silage display first the 1690 will be picking up and will be side filling a DB 1490 (when also built) im trying to recreate a scene from one of the orignal promotional video's by david brown. then later ill get a case 2290 and also moddefie it with better wheels and a front 4wd axle ect to make it look like my uncles one and also add it to the display (when its also made )

My uncels are contractors and use all David Brown and case tractor's in there buissness! one DB 1200 has completed over 40.000 hours and gets a rebuild every 6,000 or that not a full one but just the likes of gaskets been replaced and things like that! one DB 1690 4wd has over 30.000 hours also! and most of the tractors are over 10.000 at least.

Oh yeah nigel i seen your video earlyer the dancing tractor's its brill!