Paul Palmer Posted January 26, 2016 Share Posted January 26, 2016 anybody on here have the universal hobbies case ih quadtrac 600? im asking because i want to know if it would be easy to get a driver in the cab,thanks in advance Link to comment Share on other sites More sharing options...
mike whiting Posted January 26, 2016 Share Posted January 26, 2016 Paul, the cab on the UH quadtrac 600 are fixed shut, however the doors on the Ertl 1/32 precision series model do open; http://www.ebay.ie/itm/ERTL-1-32-CASE-IH-STEIGER-STX-450-FWD-TRACTOR-SERIES-II-PRECISION-1-/271456140687?hash=item3f340bfd8f:g:L3gAAOxyBvZTTb2T open Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 26, 2016 Author Share Posted January 26, 2016 30 minutes ago, MadMark said: There's 2 screws underneath that releases the whole cab (with a bit of giggling) then there's 6 little screws, 1 holds the steering wheel and 5 little buggers remove them then gently prize the cab off the floorpan. Be very careful where you put your hands as the work lights brake off easy so it is possible then Mark,thanks Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 26, 2016 Author Share Posted January 26, 2016 7 minutes ago, mike whiting said: Paul, the cab on the UH quadtrac 600 are fixed shut, however the doors on the Ertl 1/32 precision series model do open; http://www.ebay.ie/itm/ERTL-1-32-CASE-IH-STEIGER-STX-450-FWD-TRACTOR-SERIES-II-PRECISION-1-/271456140687?hash=item3f340bfd8f:g:L3gAAOxyBvZTTb2T open thanks Mike Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 26, 2016 Author Share Posted January 26, 2016 no Mark Link to comment Share on other sites More sharing options...
Barry Posted January 26, 2016 Share Posted January 26, 2016 5 minutes ago, MadMark said: Update Paul: don't try with the U.H. one as I've just gone to put it together and the cab has just broke on every screw hole and now I have a scrap model. Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 26, 2016 Author Share Posted January 26, 2016 what were you going to do to it Mark? cant it be repaired without the repair showing? Link to comment Share on other sites More sharing options...
Barry Posted January 26, 2016 Share Posted January 26, 2016 The challenge now Mark is to make it right again, if you can do that, you can do anything! I would suggest glue....but not super glue as it may fog up the windows and doors of the cab. Link to comment Share on other sites More sharing options...
Tractorman810 Posted January 26, 2016 Share Posted January 26, 2016 What ,damaged that you can see it in the glass mould parts, or you can't fix it down any more?? Link to comment Share on other sites More sharing options...
Tractorman810 Posted January 26, 2016 Share Posted January 26, 2016 So it's easy to get a driver in and out then if you got the lights back on at least then mark?? as long as the glass isn't broken where you can see it just glue it back on using a smog free super glue, would never know then, box it up and save it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.