Markies Fence Post... funny eh...get it

[Lord Ferguson]

As promised... here's my MKI fencing.... Like a Twirp I made it too small.... measure twice... cut once... I measured once... cut eight times, glued, painted, errected and then found out I'd made it 20mm too small - what a pillock... never mind - there is a lesson for you all 

Posts are 4mm plastrut (using 5mm on the MKII model) - glued, drilled, mounted on my 500mm moveable base idea so I should be able to move the fencing around my layout.. base bosard will be painted (well not this one as it will be scrapped when the MKII comes out  ) - Chainlink is just insect mesh (thanks whoever had that idea but I picked it up in a JCB bucket post I think  ) - What do you reckon... tell me your HONEST opinion... I won't take a fence  :D \

[NewHolland2]

That looks the business Marky, well worth the effort mate...... :)

That will form a nice perimeter around your set-up...... :)

[JC]

Furkin brilliant Marky, is it as easy to break through as the real stuff??   :

[Gunn]

it is a bit small right enough, looks good though

[Lord Ferguson]

Thanks boys... all you need is some 1:32 wire cutters Doc and yer in... watch out though as when you get through a 1:32 scale Alfrid will pounce on you and lick you into submission 

Another view 

[Lord Ferguson]

I made a simple jig up for the posts which made life much simpler... use it to mark and drill the holes as well (on my dremel pillar drill thingy - well worth the ?50 price tag if anyone's thinking about buying one)

[Lord Ferguson]

Last view... I promise 

[JC]

I bet it was cheaper than the stuff I've just had put up in front of one of our yards.  :'( :'( :'( :'(

All these pictures and no tatty box rotator.  :

[Lord Ferguson]

Sorry Doc.... I'll do a special for you tomorrow night - I only bought the JCB last week (as someone... not naming any names... who came round my house.... and let the dog lick him.... ) told me to buy the wrong thing.. had one attempt at getting the bucket off but it wouldn't come - does one just yank it up and off or is there something I don't know about 

[sparrow legs]

duck me, that fencing is brilliant, it looks so realistic, ive spent hours cutting through the dam stuff when it has been layed on local waste ground and feed into my flail mower, bolt cutters to the rescue!

just when i think you have done ya best ideas you come up with more, cant wait to see whats next.

[Lord Ferguson]

Thanks Sparrows Legs.... Divorce next if I keep spending all night out in the workshop I reckon  :D

Just off there now again then 

[NCC]

Superb Marky looks just like the real stuff, but were are the illegal immigrants trying to jump it :D

[JC]

They're running around the end of it. 

[Udimore]

:o Hooollly Fish fingers  :o

Flaming brilliant Marky  ;) Well done mate 

[FB]

looks great Marky, just right for your set-up!!!  :)

[FB]

Sorry Doc.... I'll do a special for you tomorrow night - I only bought the JCB last week (as someone... not naming any names... who came round my house.... and let the dog lick him.... ) told me to buy the wrong thing.. had one attempt at getting the bucket off but it wouldn't come - does one just yank it up and off or is there something I don't know about 

did i , i thought it fitted that one, i didn't know there was a difference between the 2? ???

[JC]

It fits the farmmaster.

[FB]

It fits the farmmaster.

He picked up the older version of the model as it was cheaper! 

[JC]

It should fit, he'll just need a wrench or scaffold tube over the end to raise and lower the arms!  :D :D

[Deere-est]

MARKY - BRILLIANT!!!!!!!!!!!!!

(Everyone else has summed it up for me but for an industrial unit or a dealers yard and such like your method is the one to follow, or. .. pheasant pens. . . now there's an idea!!!!!)

[THEBRITFARMER]

Well bugger me with a fishfork  :D

Absolutely Brill  just need some of your barbed wire and you'll be well away.

[Tractorman810]

spot on marky ,will look good round the fergy dealer,keep out all those dribbling jq fans ,envious of proper machinery they don't hace  :D

[Lord Ferguson]

Well bugger me with a fishfork  :D

Absolutely Brill  just need some of your barbed wire and you'll be well away.

Thanks again boys... the MKII model (already under construction  ) is going to have barbed wire I think.... If I can find the time  :'( :'(

[Old Ford]

well i missed this topic yesterday   not a bad thing  not keen on nuts. fantastic marky you've out done your self again, whats next. ??? :P 8) 8)

[Lord Ferguson]

Thanks Old Ford... cup of tea and a slice of cake to be truthful 

[FB]

try and get round monday if i can to inspect  ;D ....if the car doesnt smoke again!!  :D