Jump to content

The Old Council Yard


Recommended Posts

I've been pondering on weather to put this up, it would probably be better on a truck forum but still wouldn't fit in their, not detailed enough to fit in with the 1/24 stuff and not of a great enough quantity to fit with the 1/50 stuff, so here it is.
This will be a yard to display and store my 1/32 trucks, both the modern stuff and the vintage items.
I'm basing it on a number of Council yards I've stumbled upon across the country, mainly the yards at Ballater, Scotland and Crymych, Wales which are mainly worn out pebble dash sheds which give a great platform for building the most detailed diorama I've done. It puts my wood yard on the back burner/replaces the need for extending it.
First off some reference photos to show what I'm trying to achieve.

Ballater
Screenshot_2015-05-08-17-30-56_zpsv3qyvm

Screenshot_2015-05-08-17-29-51_zps7evsul

Screenshot_2015-05-08-17-29-26_zpshptxfh

And Crymych, photos from rightmove as the yard was for sale.

36926_2482556_IMG_01_0000_zpszmgt9ear.jp

36926_2482556_IMG_03_0000_zpsxhyolnhk.jp

36926_2482556_IMG_00_0000_zpsgk5xrcsi.jp

Link to comment
Share on other sites

Next up are some archive photos of when Bert Rose (owner of the yard and of B.Rose&Co.) put up the first of the sheds on the land in 1975. He built this yard after gaining a contract with the local Perthshire council to take over all their winter maintenance. During this time he got to know J.A.Cuthbertson of Biggar working closley on the development of his snow removal kit, much of which is still in use today.

There are two sets of photos, one set in colour the others sadly in black and white. They show the work force using the Foden DG timber wagon and JCB 3CIII moving the precast concrete panels into place after being delivered by the then brand spanking new Scania 92 of Silverline tractors.

61747c44-d270-4725-b18e-47335d19412d_zps

34688d0b-c925-48a9-bd4f-380d3159add4_zps

57e93d81-fe46-4a65-855e-c4920ceaabc4_zps

c9e6f38e-5746-4a33-8322-4797d9fc4e75_zps

4d91e304-3a75-457c-ba19-93fdea26e64a_zps

c0999740-d007-4381-8289-74f5b0241c93_zps

Link to comment
Share on other sites

Also in with the same lot of photos was this recreation from when the extention to the shed was added in 1978

05e5c0d7-bb41-445b-b3c8-f441375a0b95_zps

Minus the Foden which by this point had got to too rough a state to be used and was laid up till 1996 when it underwent restoration.

Link to comment
Share on other sites

South West Paul, Pembrokeshire. Never been personally just stumbled upon the place through a google search.

ah i see,we used to go to a cottage in a village called Rosebush,im sure Crymych was close by,great topic James,something really different,very nice

Link to comment
Share on other sites

Now how the shed was built up,

its made with a core of 5mm foamboard. This was then layered in P40 and P80 sand paper to represent the pebble dash/concrete texture, the sand paper then had a wash of matt white

IMG_20150509_115918_zpszyyvialf.jpg

Then it was all weathered. This was done by dry brushing some black on first to grey up the white and age it. Then I dry brushed some green on to represent the mouldyness of the shed in ballater. The front doors are made from mountboard, cut/scored to represent planks and then scratched with a wire brush to create a grain for the wood texture. This now needs painting. Some gloss green was allowed to run down the side to represent the slimey gunk that has formed through years of water running down the side of the building.

IMG_20150510_170036_zpsw6jaxkwh.jpg

IMG_20150513_213355_zpsbnqk4tu5.jpg

 

IMG_20150513_213402_zpst9zchlue.jpg

The roof is a mountboard base with corrugated card applied on top, this has then been painted black on the main shed and silver on the extention however the colour wont be visible once finished as both will be covered in vegetation

IMG_20150513_213527_zpsxgtlut9e.jpg

IMG_20150517_143514_zpsjftznypy.jpg

This is where I'm up to so far. As I build the yard I will also be constructing vehicles to go in it, the best way I have of giving you a taste of what these vehicles will be is to give you the link to my Flickr favorites which show a collection of the vehicles I eventually want to model

https://www.flickr.com/photos/76989017@N04/favorites

Thanks for Looking, hope what you've seen is something different to the usual on here.

 

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Nice fleet there James, why the orange and black scheme? It's not one you see often

For that exact reason Pat, you don't see it and I wanted something original. The basis started with Stevenson of Avonbridge's orange colour scheme, mix that with that with inspiration from a local haulier ADD Express' two colour Silver and Red colour scheme and the fact there was a big 5 litre tin of tipper body grey in the garage and the orange and grey was born which turned into Orange and Dark Metalic Grey when I strated painting them with a spray can. 

Link to comment
Share on other sites

  • 2 weeks later...

Its loosley based on this irish rig with Pezzaioli bodies so it will get a drag at some point. Whether I go with lift of bodies is less likely, I'm thinging of making a flat bed wagon and drag from my laser cut Scania streamline cab, something like W.M.Ellison's

https://m.flickr.com/#/photos/66697356@N08/14515119865/in/favorites-76989017@N04/

Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...

The Scania Livestock Wagon as it stands now, this is the colour scheme I'm going for having everything in, grey cab, orange base and chassis with a grey grill and orange highlights, some stuff will be repainted and new builds done in this scheme such as the T-Cab which is next on the list to start and not finish haha

IMG_20151114_122934_zpsuufkqmmp.jpg

IMG_20151114_122511_zpsva632tfr.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.