Tractorman810 Posted January 12, 2013 Share Posted January 12, 2013 work, followed by straight out for our late works "xmas" do so quick clothes change in the back of the van, and 15 of us on the bus into town ,followed by a all you can eat chinease with copious amounts of alocohol, had to be a good boy though as up at 6.30 for work ,then out again tommorrow afternoon for a late familly xmas meal after various incidents of illness over xmas/ new year put paid to the usual big meal out 1 Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 12, 2013 Share Posted January 12, 2013 cleaning a very dirty 1/32 scale rogator sprayer Quote Link to comment Share on other sites More sharing options...
MF-ROB Posted January 12, 2013 Share Posted January 12, 2013 Nah not really, the machine will pay its self off pretty quickly aswell so its all good You must have a good bit of work lined up for it Harry. Quote Link to comment Share on other sites More sharing options...
HS. Posted January 12, 2013 Share Posted January 12, 2013 There is quite a bit of work been put off until it arrives, mainly at the old mans farm, the usual drainage, a house foundations to dig, got 150 ish tonnes of topsoil to strip, but not able to get in with bigger machines, Quote Link to comment Share on other sites More sharing options...
Deere-est Posted January 12, 2013 Share Posted January 12, 2013 Logs again today, fiver tip Off out for a few beers shortly too. .. Or ciders anyway! Quote Link to comment Share on other sites More sharing options...
Barry Posted January 12, 2013 Share Posted January 12, 2013 ooo, where to Tris, local pub? Quote Link to comment Share on other sites More sharing options...
Deere-est Posted January 12, 2013 Share Posted January 12, 2013 I think the Paulet Arms or The Three Daggers is the rendez-vous Barry, not sure what it calls itself now but it is in Edington and used to be called The Lamb. It is the http://www.threedaggers.co.uk/history as I have just found! Quote Link to comment Share on other sites More sharing options...
Light Land Posted January 12, 2013 Share Posted January 12, 2013 cleaning a very dirty 1/32 scale rogator sprayerWould you mind taking a picture of it please Paul,can't think what that model looks like. Quote Link to comment Share on other sites More sharing options...
Barry Posted January 12, 2013 Share Posted January 12, 2013 Would you mind taking a picture of it please Paul,can't think what that model looks like. Have a look here Olly 1 Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 12, 2013 Share Posted January 12, 2013 Have a look here Olly thanks bas for providing a link Quote Link to comment Share on other sites More sharing options...
HS. Posted January 13, 2013 Share Posted January 13, 2013 Playing about in my cousins 8085zts getting a feel for the machine before it arrives, 28 days to go Quote Link to comment Share on other sites More sharing options...
MF35_MAN Posted January 13, 2013 Share Posted January 13, 2013 Re-working my work related wordpress website/blog. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted January 13, 2013 Share Posted January 13, 2013 got the coving i needed ready to do the dining room ,then fitted the 2 new double sockets into the ring main one in the dining room, the other into the bedroom above ,and refilled the wall downstairs to cover the new cables in, upstairs was easy as its a std wall, simple cavity box fitting there. removed the rad ready to fit the new one shes picked out, just got to drain the system to cut and move the pipes over to get it in the new position . removed 2 walls worth of skirting board so i can remove the old laminate floor, leaves me the minimal work to lay the new flooring and refit the skirting then, rather than all 4 walls worth, all the cracks chips ect arround the walls dug out and filled . not to bad really seeing as i only started at 2 pm after going out for breakfast at 11, bit late up this morning Quote Link to comment Share on other sites More sharing options...
HS. Posted January 15, 2013 Share Posted January 15, 2013 cleaning snow, and moving concrete with the 8085zts so has been a rather quiet day, now tommorow, get to find out wether its a boy or a girl were having, feeling rather nervous Quote Link to comment Share on other sites More sharing options...
pj witch Posted January 15, 2013 Share Posted January 15, 2013 driving the mini bus in icey conditions while driving around sudbury my mirror was filled by a emmett merc low loader Quote Link to comment Share on other sites More sharing options...
dm434 Posted January 15, 2013 Share Posted January 15, 2013 gritting most of the day since 4am , no snow to speak of . all was well till the wagon set off vibrating while traveling. u.v joint on the front prop shaft knacked up. by the time i got back to the depot it had rattled the transfere box loose Quote Link to comment Share on other sites More sharing options...
Deere-est Posted January 16, 2013 Share Posted January 16, 2013 Off to East Sussex for a tractor then back to West Sussex to pick up a tractor and a baler. Nice day Quote Link to comment Share on other sites More sharing options...
HS. Posted January 16, 2013 Share Posted January 16, 2013 Found out that we're having a wee boy, can not explain how happy I am, 3 Quote Link to comment Share on other sites More sharing options...
BC Posted January 16, 2013 Share Posted January 16, 2013 I'll bet your are going to enjoy buying and playing model tractor's with him in a few years time Harry 1 Quote Link to comment Share on other sites More sharing options...
CMB Posted January 16, 2013 Share Posted January 16, 2013 Amazing news for you Harry 1 Quote Link to comment Share on other sites More sharing options...
turbo22 Posted January 16, 2013 Share Posted January 16, 2013 Walking around a very cold LAMMA show at Newark. Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted January 16, 2013 Share Posted January 16, 2013 freezing my n**s off at work 1 Quote Link to comment Share on other sites More sharing options...
MF-ROB Posted January 16, 2013 Share Posted January 16, 2013 Found out that we're having a wee boy, can not explain how happy I am, ah congrats Harry you will soon have him in JCB overalls 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted January 16, 2013 Share Posted January 16, 2013 Walking around a very cold LAMMA show at Newark. did you come across andy freezing his nuts off?? :laugh: must have been hellish busy, they were still giving out traffic warnings to avoid the area at 2 pm this afternoon Quote Link to comment Share on other sites More sharing options...
turbo22 Posted January 16, 2013 Share Posted January 16, 2013 Yes did see him, he was busy so didn't speek. Lot of people there but no traffic problems for us, just over an hour for us. About 1/4 hour from joining traffic to being parked, and about the same getting out. What next year will bring at Peterbourgh who knows. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.