griffithsbros Posted February 15, 2008 Share Posted February 15, 2008 i got a krone big m today and the springs which are on the left hand sie mower are not attached Quote Link to comment Share on other sites More sharing options...
Lord Ferguson Posted February 15, 2008 Share Posted February 15, 2008 i got a krone big m today and the springs which are on the left hand sie mower are not attached Any chance of a pic GB Quote Link to comment Share on other sites More sharing options...
griffithsbros Posted February 15, 2008 Share Posted February 15, 2008 here you go Quote Link to comment Share on other sites More sharing options...
noel Posted February 15, 2008 Share Posted February 15, 2008 i got a krone big m today and the springs which are on the left hand sie mower are not attached I had the same problem when i got mine, fixed it with some wire though. Very fiddly and time consuming but worth it now Quote Link to comment Share on other sites More sharing options...
Lord Ferguson Posted February 15, 2008 Share Posted February 15, 2008 Oh I see... thanks foir the pic... Anyone else had this problem Quote Link to comment Share on other sites More sharing options...
griffithsbros Posted February 15, 2008 Share Posted February 15, 2008 the other side is ok Quote Link to comment Share on other sites More sharing options...
griffithsbros Posted February 15, 2008 Share Posted February 15, 2008 I had the same problem when i got mine, fixed it with some wire though. Very fiddly and time consuming but worth it now i can fix it i was just a little dissapointed Quote Link to comment Share on other sites More sharing options...
powerrabbit Posted February 15, 2008 Share Posted February 15, 2008 i can fix it i was just a little dissapointed Looks like the pin (or is it a threaded + head little bolt) is missing, if you just took it out the box it may be floating around inside somewhere or jammed up in the model itself, worth a search. I've had UH models like that and found the bit(s) floating around. Quote Link to comment Share on other sites More sharing options...
JEP Posted February 19, 2008 Share Posted February 19, 2008 On a recently received Claas Europa, the unloading auger literally hangs down as it is opened out into the unloading position, on closer inspection, there appears to be a fine crack in the plastic eye hole where the small screw goes through (the bit that is effectively holding the auger to the tank) hope that makes sence \. I would send it back, but as it was given to me as a present,(and yes it was new, and un opened ) it is a little difficult I have emailed U-H for a replacement auger (I will even pay!), but I havn't had any reply. Does anyone on FTF have any U-H contacts/or is any one dealing in convos/mods. of this combine yet, who has a spare auger for sale??? Quote Link to comment Share on other sites More sharing options...
MODELFARMER Posted February 25, 2008 Share Posted February 25, 2008 :D - I've got them for a "friend" :D u have no friends Quote Link to comment Share on other sites More sharing options...
powerrabbit Posted February 25, 2008 Share Posted February 25, 2008 Not a serious fault but in U.H's school report it would have said 'could do better'. The fault? One back wheel on the 1:16 silver Fordson Major is loose, too much side-play, needs a new bearing! Quote Link to comment Share on other sites More sharing options...
Lord Ferguson Posted February 25, 2008 Share Posted February 25, 2008 Not a serious fault but in U.H's school report it would have said 'could do better'. The fault? One back wheel on the 1:16 silver Fordson Major is loose, too much side-play, needs a new bearing! A lot of the standard power majors were like that as well Tim \ Quote Link to comment Share on other sites More sharing options...
MODELFARMER Posted March 1, 2008 Share Posted March 1, 2008 MF 135. . .2 Filler caps below bonnet for tvo?? come on?? Quote Link to comment Share on other sites More sharing options...
allis8550 Posted March 1, 2008 Share Posted March 1, 2008 Not two filler caps ,but one filler cap and the fuel gauge sender. Quote Link to comment Share on other sites More sharing options...
MODELFARMER Posted March 1, 2008 Share Posted March 1, 2008 i'm not with ya?? Looked like two to me ha ha Another Cougar outside mowers do not stretch out to full 50ft width Quote Link to comment Share on other sites More sharing options...
SIMON. Posted March 1, 2008 Share Posted March 1, 2008 Wouldn't it be easy and use less server space if we listed the stuff they done/got right :D :o Quote Link to comment Share on other sites More sharing options...
Deerepower Posted March 1, 2008 Share Posted March 1, 2008 you would need a very big room for them to stretch out to 50ft width :D Quote Link to comment Share on other sites More sharing options...
MODELFARMER Posted March 1, 2008 Share Posted March 1, 2008 Wouldn't it be easy and use less server space if we listed the stuff they done/got right :D :o HA HA you would need a very big room for them to stretch out to 50ft width :D You would need a room about 50ft wide i reckon Quote Link to comment Share on other sites More sharing options...
rich.new holland Posted March 1, 2008 Share Posted March 1, 2008 and you would hit the walls need a bit more for the gaurds Quote Link to comment Share on other sites More sharing options...
allis8550 Posted March 2, 2008 Share Posted March 2, 2008 i'm not with ya?? Looked like two to me ha ha Another Cougar outside mowers do not stretch out to full 50ft width Lift the bonnet flap on a 135 and from front to back you have, radiator cap, fuel tank cap and fuel gauge sender [ should be dull aluminium/plated finish with two wires running to it], otherwise exactly as UH have modelled it. Quote Link to comment Share on other sites More sharing options...
James T Posted March 3, 2008 Share Posted March 3, 2008 Claas Quantum baler - the left hand side rear wheel doesn't touch the ground but floats about 2mm off it. Quote Link to comment Share on other sites More sharing options...
TM190 Posted March 19, 2008 Share Posted March 19, 2008 Massey Ferguson 5480.. Floorplan doesn't sit on level on every one i've had it bits, \ \ \ about 8 : : Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 20, 2008 Share Posted March 20, 2008 i think its the actuall florpan mate as when i re did my 6470 one i had to pack the floor out more one side than the other, so tried it on a old siku 54 chassis and it was the same i seem to remember Quote Link to comment Share on other sites More sharing options...
MDFord Posted March 20, 2008 Share Posted March 20, 2008 The last Valtra T I used for parts had the front axle problem Sean mentioned that was on the MF 5480 - one wheel raises up when the steering turns. Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 20, 2008 Share Posted March 20, 2008 The last Valtra T I used for parts had the front axle problem Sean mentioned that was on the MF 5480 - one wheel raises up when the steering turns. should be able to fix it the same way as the fergy, just snip the lug of the top of the steering arm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.