catkom3

No Paul " Prestige" so a wee bit cheaper,http://www.outbacktoystore.com/Farm-Toy-Replicas/IH-Farmall-Collectors/1-16th-Prestige-Series-International-1206-Wheatland.html Regards Joe.

Just found the perfect tractor for your lowloader Paul,?? But I don't think your into Internationals, Regards Joe.

Type,!!! copy and paste, https://www.facebook.com/RCBedfordModels/ Regards Joe.

Yip,they were all square tops when I was a kid,here's a photo of the late Mr Wood beside his 135,I see from the reg it is ASV,which I'm guessing would have the suffix D,= 1966,??? That's why I put square mudgaurds and a Duncan cab on mine, Regards Joe.

Like the look of that Sean, Regards Joe.

Well I haven't been able to get hold of a particular items for the flock so will have to wait on that for a few days after a eBay buy, but we have receive a new bit of kit ready for the summer, our old grab was showing its ages and a few welds were going so we purchased a new Browns one,just got to make a flat 8 bale pack from my hand made ones to mount on it properly ,and of course order some more bales I'm guessing you probably tried already,but you might get more results useing "scatter" as well as "flock",also if you got the "tea strainer" type head their only good for short stuff 3-6 mm,I tried 10mm in mine and got nowhere,!! Regards Joe.

Don't know if this is true or not Mark,but,I was always led to believe adding talc to gloss paint made it matt,never tried it so don't really know. Regards Joe.

Those step are 10mm wide by 7mm at there deepest Sean, Regards Joe.

Would these be suitable Sean,http://www.farmmodels.nl/Webwinkel-Product-17414070/21170-opstap-steunen-traptredes-met-anti-slip-profiel-4-delig.html Regards Joe.

Loads of demo videos on YouTube Sean,this is a good one,it highlights the danger of touching contacts.??? https://www.youtube.com/watch?v=bsjv17SDjVw Regards Joe.

A very Happy Healthy and Prosperous 2016 to everyone, Regards Joe.

You don't need to be clever smithy,it's the simplest thing in the World,watch this,https://www.youtube.com/watch?v=mXRT2YH8EDM Regards Joe.

Here you go smithy,a direct link,https://www.youtube.com/watch?v=_FA5-3ClsVg Regards Joe.

My apologies Paul,I was measuring the wheel,Plus the tyre,and Mark I think your right,but the alloys would be a wee tad expensive although,Henry does sell these which would be about right,but I don't think they would look good, http://www.farmmodels.nl/Webwinkel-Product-3634781/37014-Cultuurwielen-groot-vooras-(grijze-velg)-(04226)-.html Regards Joe.

Paul,I have the 8250 which according to the JCB web site has the same front wheels 540 - 65 - R34,and they measure 55mm x 16.5 mm,?? Regards Joe.

The JCB web site spec sheet say's tyres are 540 - 65 - R34,which scales out,according to the http://www.agriscale.nl/banden_calculator/ = 48.925 x 26.9875 x 16.875 or similar to the Siku Fastrac,?? Regards Joe.

22mm,is that width or diameter,22 seems very small Paul, Regards Joe.

What diameter are the wheels on the 4220,and are the fronts and rears same size,?? Regards Joe.

The only wee niggly thing I can think of is,when you click on the "Unread Content" button,it doesn't always take you to the last reply,quite often it takes you half way up the page,?? Regards Joe.

Not really today,but yesterday when Brian kindly dropped this off for me,which one of these models do you reckon is closest to 1/32nd scale,I'll give you a clue,it's not the little expensive one in the middle,it's only 70.8 mm wide,closer to 1/36th scale,should be 78mm to represent 2.5 meters. Regards Joe.

I think I just turned the mould boards on all four plough bodies and put the wheel where the fifth one was,added some blue paint and put on aluminium pipes to represent the hydraulics,and some thin rubber tubing for the hoses, Regards Joe.

It isn't to difficult Martin,I used three of these Siku Lemken Euro Opals to make this Överum push pull set up, Regards Joe.

Pete Hardy does weights Paul,http://www.132farmingmodels.co.uk/products.aspx?ps=s19&nv=22 Regards Joe.

Henry also gives freebies,because he knows the Dutch postage is high,Paul Mandy at HLT deals with farmmodels,might be worth giving her a PM, Regards Joe.

Henry Selten is Dutch,he own's farmmodels nl, http://www.farmmodels.nl/ he sells almost everything you could possibly want in 1/32nd scale,Alex got his Fendt wheels here, http://www.farmmodels.nl/Webwinkel-Category-607272/Trekker-Zelfrijder.html but I don't know exactly which ones he used, Regards Joe.