robbo Posted July 22, 2009 Share Posted July 22, 2009 Came across this one whilst out and about today being used by a drainage contractor, he told me that they actually have 2 of these :o The trailer part has a chute for delivering the gravel into the drainage channel Quote Link to comment Share on other sites More sharing options...
robbo Posted July 22, 2009 Author Share Posted July 22, 2009 The rear wheel are also driven via the propshaft and the whole thing hinges in the middle to steer View from inside the cab Now (apart from the reflection of me in the glass) am I right in thinking this has only 963 hours on the clock If that is the case it is not too bad for a 1984 tractor. 8) 8) He did also say that it was for sale if I wanted to buy it :o :o Can you imagine me going home and saying to Mrs R "Hello dear, I have bought a little something for you today" ;D ;D Quote Link to comment Share on other sites More sharing options...
nashmach Posted July 22, 2009 Share Posted July 22, 2009 Could be 10,963 either but the condition suggests otherwise - if it could be bought right it would be ideal if it was converted back to standard! Quote Link to comment Share on other sites More sharing options...
PDC Posted July 22, 2009 Share Posted July 22, 2009 Pearl land drainage from Essex have some of these I think there's are based on 7710's though ??? Quote Link to comment Share on other sites More sharing options...
robbo Posted July 22, 2009 Author Share Posted July 22, 2009 Could be 10,963 either but the condition suggests otherwise - if it could be bought right it would be ideal if it was converted back to standard! It was certainly in good condition, the only damage apparent was on the offside of the bonnet So who is going to be the first to do a convo? : : : Quote Link to comment Share on other sites More sharing options...
PDC Posted July 22, 2009 Share Posted July 22, 2009 Here's a similar conversion I built some time ago Quote Link to comment Share on other sites More sharing options...
robbo Posted July 22, 2009 Author Share Posted July 22, 2009 Should have known I would have to get up early in the morning to catch you out Paul :D :D I will have to try harder to find a model you haven't ever done > :( Quote Link to comment Share on other sites More sharing options...
nashmach Posted July 22, 2009 Share Posted July 22, 2009 Here's a similar conversion I built some time ago You had right to say you have just done it Paul Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted July 22, 2009 Share Posted July 22, 2009 bit of a monstor aint she mike, certainly looks in good nick, be surprised if that 936 hrs to be honest, its a old machine and i cant see a drainage contractor having low hours like that, maybe round the clock mind Quote Link to comment Share on other sites More sharing options...
denis086 Posted July 22, 2009 Share Posted July 22, 2009 judging by the wheels id say shes had the tyres swaped if she only 936 hrs or shes high houred and on her second set we have the original firestone tyres on our 3085 and they look something simlar with over 7000 hrs on them that what im judging by \ Quote Link to comment Share on other sites More sharing options...
archbarch Posted July 23, 2009 Share Posted July 23, 2009 When i worked for a drainage contractor in the mid 80s the stonecart tractors Muir Hills and Roadless were given alot of stick and looked alot worse after just a few years. As for the hours they maybe genuine doing drainage work perhaps just a few weeks a year, and only a few hours a day, plus older tractors only started clocking hours at certain engine revs not when the key is turned. Would be a good tractor to put back to its original form Did it start life as a 2wd version Quote Link to comment Share on other sites More sharing options...
ploughmaster Posted July 23, 2009 Share Posted July 23, 2009 Thats right, it was proportional to engine speed - an hour on the clock was only an hour at a certain engine rpm (can't remember whether it was at rated engine speed, or at something like ipto revs). At lower revs, a clock hour would be longer than 60 minutes and at higher revs, it would be less than 60 minutes. I would think that the tractor was probably new when the conversion was done. I expect it would have started life as a 2wd (I would be surprised if they used a 4wd). Quote Link to comment Share on other sites More sharing options...
altrac Posted July 24, 2009 Share Posted July 24, 2009 You see some unusual fords about! This one for example: Quote Link to comment Share on other sites More sharing options...
altrac Posted July 24, 2009 Share Posted July 24, 2009 And this one: http://www.midsuffolkagriphotos.co.uk/gallery/gp446.htm Quote Link to comment Share on other sites More sharing options...
ploughmaster Posted July 24, 2009 Share Posted July 24, 2009 The 7610 on halftracks was a test machine built by Silsoe Research in the early 90's, long before the current half track conversions were thought up. I used to drive a Chafer Tramliner SP similar to the one in your second post. It was a bit older though; it was mated to a 7600 power plus (which was a late model 7600 with some of the features of the 7610, the main one being the 10 series engine. A wide boom combined with artic steer was a bit exciting at headlands!! Quote Link to comment Share on other sites More sharing options...
sparrow legs Posted July 30, 2009 Share Posted July 30, 2009 abbot? drainage run some gravel carts like that, some are based on the later 40 series (7740/8240 etc) they worked on a golf coarse near me a while back then on a gas pipe line job. buying an old gravel cart or sprayer rig could be a good cheap tractor as no one would think of buying one as it is but convert back with a front axle and ya away Quote Link to comment Share on other sites More sharing options...
stehos Posted August 3, 2009 Share Posted August 3, 2009 Are you sure the rearaxle is driven, I can't remember this type of tractor has ground speed PTO which is neccesary for this kind of driveline. Might it be possible tehy used a 4wd model and they took drive for the rearaxle from this point. Quote Link to comment Share on other sites More sharing options...
RichardJW1 Posted August 3, 2009 Share Posted August 3, 2009 Are you sure the rearaxle is driven, I can't remember this type of tractor has ground speed PTO which is neccesary for this kind of driveline. Might it be possible tehy used a 4wd model and they took drive for the rearaxle from this point. Can't see how it is possible they could take the drive backwards to the rear axle on a Ford Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted August 3, 2009 Share Posted August 3, 2009 would they have done a 4wd convo, and put a transfer box into the front axel drive, send it back under the rear to the trailer??? Quote Link to comment Share on other sites More sharing options...
RichardJW1 Posted August 3, 2009 Share Posted August 3, 2009 would they have done a 4wd convo, and put a transfer box into the front axel drive, send it back under the rear to the trailer??? would have thought it would drastically reduce ground clearance Quote Link to comment Share on other sites More sharing options...
Tellarian Posted September 14, 2009 Share Posted September 14, 2009 For history and info..... http://www.aardvarkequipment.co.uk/Art.Dump%20Trucks/Transters/self%20propelled%20gravel%20cart.htm Quote Link to comment Share on other sites More sharing options...
PDC Posted September 14, 2009 Share Posted September 14, 2009 Never heard of them and they're only 12miles from my work :o :o Quote Link to comment Share on other sites More sharing options...
Tellarian Posted September 14, 2009 Share Posted September 14, 2009 Never heard of them and they're only 12miles from my work Roadtrip! Quote Link to comment Share on other sites More sharing options...
robbo Posted September 14, 2009 Author Share Posted September 14, 2009 That's a great Link Tellarian, interesting reading thanks 8) Quote Link to comment Share on other sites More sharing options...
powerrabbit Posted September 14, 2009 Share Posted September 14, 2009 Looks to me like the PTO shaft isn't beefy enough to be the drive for the rear wheels, I suspect it's the drive for the internals and gravel delivery conveyor on the trailer part. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.