Deere-est Posted September 1, 2010 Share Posted September 1, 2010 A new topic for everyone to make use of. Please add your own experiences of tools from the most simple to the most complexed. Whether hand operated or power operated. It would be helpful to everybody if you included: Some photos and product information. How much it cost. What you use it for. How long you have had it. Whether it replaced another tool. Also, is it any good?! Thanks in advance. Quote Link to comment Share on other sites More sharing options...
1 Awdmac Posted August 7, 2019 Share Posted August 7, 2019 Splashed out on an RP Toolz mitre cutter after reading some good reviews on it. Have struggled a bit getting 1394 nose guard done with the angles and size involved, thought this might help future projects. Solid piece of kit, as yet to be tested. Also had a Birch leaf maker, other types of leaf available, should fill the winter evenings tree making. 1 Quote Link to comment Share on other sites More sharing options...
0 Deere-est Posted December 26, 2010 Author Share Posted December 26, 2010 I have had my Dremel three or four years, Brian. I have not used it quite so much in the last year I must admit but they are a superb tool. If you can make what you do with the tools that you have that's great but don't knock others who cannot or chose differently, eh? Quote Link to comment Share on other sites More sharing options...
0 Janval Posted June 21, 2017 Share Posted June 21, 2017 I'm a few years late to the party here, but I've just ordered a simple set of tools on ebay. Didn't cost much but I guess it'll do for experimenting with the plastic and wood materials 1 Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 2, 2010 Share Posted September 2, 2010 Good topic Trissie!!! Here is some of the tools that i use.. Proxxon KS230 table saw: i bought for about one month ago and all i can say...Exellent tool,just amazing!!!! 130 euros Proedge for platic cut: for precision cut,cant live without them.I bought them for 1-2 years ago 25 euros Quote Link to comment Share on other sites More sharing options...
Jez Posted September 2, 2010 Share Posted September 2, 2010 Here was what i used to use mainly: It was all very useful, especially the saw, blades and sanding block. http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=21835&ipadd= Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 2, 2010 Share Posted September 2, 2010 Here was what i used to use mainly: It was all very useful, especially the saw, blades and sanding block. http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=21835&ipadd= You mean what i use Jez ...com on now mate lets see some brass build again!!! I have the saw and it is very nice but not the sanding block Quote Link to comment Share on other sites More sharing options...
BC Posted September 2, 2010 Share Posted September 2, 2010 Well I don't do much in this line other than the SCALEdown build of a Farmall A earlier this year. My tools were rather minimalistic and were probably all acquired other than the brass brush for cleaning the larger pieces of castings. Just a few pairs of small tweezers, a magneto file, a round file, a scriber and a pin vice which could hold small drills to clean out any holes in the castings Quote Link to comment Share on other sites More sharing options...
FB Posted September 2, 2010 Share Posted September 2, 2010 mmmm table saw is tempting! so far, a small chopper, like Sean has, for cutting plastruct. have good and bad days with it, like most tools!, Thinking about either getting another to just use for straights, rather than keep changing the angle plate. Ideal for people who don't get much time as not expensive!.....have my eye on another version though that EMA stock!! ;D This one is £7.95 and comes with two types of blades, http://www.proopsbrothers.com/ (website seems to not show anything up for some reason?) here's ebay link http://cgi.ebay.co.uk/MULTI-ANGLE-CRAFT-AND-HOBBY-GUILLOTINE-/350288626620?pt=UK_Papercraft_Tools_Accessories_2&hash=item518ed443bc#ht_537wt_820 replaced, well nothing really, just allows me to cut the same angle on the frames, i guess though, no need to make a jig up, although more thinking required when gluing! Quote Link to comment Share on other sites More sharing options...
Deere-est Posted September 2, 2010 Author Share Posted September 2, 2010 Small chopper So that's what Julie mean't!!! Quote Link to comment Share on other sites More sharing options...
FB Posted September 2, 2010 Share Posted September 2, 2010 Small chopper So that's what Julie mean't!!! sssshhhh you cheeky little hobbit!! :D :D Quote Link to comment Share on other sites More sharing options...
Jez Posted September 3, 2010 Share Posted September 3, 2010 Here was what i used to use mainly: It was all very useful, especially the saw, blades and sanding block. http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=21835&ipadd= Also this: Draper 140W 230V MULTI TOOL WITH ACCESSORIES Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 9, 2010 Share Posted September 9, 2010 mmmm table saw is tempting! I promise Ben you will not regret it :D Quote Link to comment Share on other sites More sharing options...
Barry Posted September 9, 2010 Share Posted September 9, 2010 Pete, what happens when you cut plastic with the table saw......does the blade melt the plastic at all, or do you get a good clean cut? Does the blade ever get clogged up with plastic waste? Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 9, 2010 Share Posted September 9, 2010 Pete, what happens when you cut plastic with the table saw......does the blade melt the plastic at all, or do you get a good clean cut? Does the blade ever get clogged up with plastic waste? Just perfect Barry,i have made a little movie for you Quote Link to comment Share on other sites More sharing options...
Barry Posted September 9, 2010 Share Posted September 9, 2010 Nice one Pete......thats brilliant, wasnt expecting you to do a movie for me!!! Think i will be getting one of them this year then, been putting it off but after seeing that its made my mind up. Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 9, 2010 Share Posted September 9, 2010 Nice one Pete......thats brilliant, wasnt expecting you to do a movie for me!!! Think i will be getting one of them this year then, been putting it off but after seeing that its made my mind up. At your service Buddy Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 10, 2010 Share Posted September 10, 2010 looks a tidy buy that pete, i asume you can do all sorts of angle cuts with it to??, whats it like on finner say 3mm L angle plastic, stuff like that, to date all i really have are 3 good metal scapels,two small blade and one large , a old battered dremmel, and a cheapo hand cut mitre block, and the cutter ben mentioned, but that bench may be a good investment Quote Link to comment Share on other sites More sharing options...
MPR Models Posted September 11, 2010 Share Posted September 11, 2010 looks a tidy buy that pete, i asume you can do all sorts of angle cuts with it to??, whats it like on finner say 3mm L angle plastic, stuff like that, to date all i really have are 3 good metal scapels,two small blade and one large , a old battered dremmel, and a cheapo hand cut mitre block, and the cutter ben mentioned, but that bench may be a good investment Yes Sean that is the best part that you can cut all sorts of angles and the cut is perfectly straight. So go get one and give us some more combines mate :D Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 11, 2010 Share Posted September 11, 2010 might well do mate, has to be a lot easier when doing repetitive cuts like say the pettit trailer sides, stuff like that Quote Link to comment Share on other sites More sharing options...
jsedelweiss Posted September 11, 2010 Share Posted September 11, 2010 http://cgi.ebay.co.uk/PROXXON-Bench-Circular-Saw-KS230-/220507730772?pt=UK_Home_Garden_PowerTools_SM&hash=item335748f354 Quote Link to comment Share on other sites More sharing options...
Deere-est Posted December 26, 2010 Author Share Posted December 26, 2010 Never actually got around to posting up the photo's of the tools I use did I?! Well here they are, non powered to start. 1. Snippers. These have different bottom blades to cut angles (shown) and .. . 2. for cutting anything, box/square profile and tubes. Local model shop, £20 I think, maybe closer to a tenner though. 3. Precision screwdrivers (perfect for the plinth displayed UH's of late) and Needle files. Around a fiver per set at Focus. 4. General hand tools, scalpel/craft knife, pointy thing , mitre block, razor saw and reverse tweezers. Various prices and from sets of different tools. Quote Link to comment Share on other sites More sharing options...
Deere-est Posted December 26, 2010 Author Share Posted December 26, 2010 1. Handy arms. Each end has a crocodile clip for gripping things for painting or glueing etc. They come with a magnifying glass but I took them off. These were about £8 I think. 2. Clamps of different types, the sliding trigger type which was a about £7, G-clamps on three different sizes, again under a tenner for a pack of three. The plastic clamps are nice and cheap, about a fiver in Focus for six I think. You can get cheaper on market stalls though. 3. Measuring tools, an Oxford Mathmatics set, slide rule and, right angle rule which is the larger of two in a set for ten quid. The side rule and tape measure are from a multi set I think which was £20 or so. Quote Link to comment Share on other sites More sharing options...
Deere-est Posted December 26, 2010 Author Share Posted December 26, 2010 1. Dremel 300 which is a superb tool. Did have the variable speed switch pack up but Dremel sent a new one within three days. I've loads of stuff for it for cutting, drilling, filing, sanding and so much more that can be done right up to tile cutting! Usually around the £50 mark I think. Also shown is the multi chuck for gripping drill bits. 2. Dremel Workstation 220 for holding the 300 in a vertical or horizontal position so you can work with both hands on the project. Has a holder for different work bits, a cable tidy and you can place it aside and use the cord attachement for finer working. Usually around the £30 - £40. 3 and 4. My all new and as yet unused Proxxon KS230 which for more info you can see Pete's posts on page 1 of this topic. It will cut wood, plastic and metal of different thickness's, has a slide rule for measuring exact and repetitive cuts, and angle attachment for the same use and a hoover socket for sucking up filings. Quote Link to comment Share on other sites More sharing options...
TM190 Posted December 26, 2010 Share Posted December 26, 2010 The Dremel 300 is my main tool.. I've had it since I start building models and never missed a beat!! Use it on pretty much every model I build.. Couldn't work without it Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted December 26, 2010 Share Posted December 26, 2010 well i have a dremmel and it must be 10 years plus? as it was the wifes before we met, still going strong and is used for all sorts from models to diy along with that i guess its 3 metal bodyed hobby knifes, a few sets of fine drill bits,2 sets of hand files, moslty small hobby ones metric mostly, precision screw drivers, my dewalt cordless drill, mitre saw like trissy's one,the hand powered one, and a digital micrometer, to me tools make it easier and quicker to produce the model, and aid in better finishes, its about ease not bare essentials, just look at greensheets stuff for a start ,bet he uses a good few tools Quote Link to comment Share on other sites More sharing options...
Question
Deere-est
A new topic for everyone to make use of.
Please add your own experiences of tools from the most simple to the most complexed. Whether hand operated or power operated.
It would be helpful to everybody if you included:
Some photos and product information.
How much it cost.
What you use it for.
How long you have had it.
Whether it replaced another tool.
Also, is it any good?!
Thanks in advance.
Link to comment
Share on other sites
Top Posters For This Question
15
10
7
6
Popular Days
Feb 28
12
Feb 26
7
Sep 2
7
Dec 26
6
Top Posters For This Question
Deere-est 15 posts
MPR Models 10 posts
Tractorman810 7 posts
Old Ford 6 posts
Popular Days
Feb 28 2011
12 posts
Feb 26 2011
7 posts
Sep 2 2010
7 posts
Dec 26 2010
6 posts
Popular Posts
Janval
I'm a few years late to the party here, but I've just ordered a simple set of tools on ebay. Didn't cost much but I guess it'll do for experimenting with the plastic and wood materials
Awdmac
Splashed out on an RP Toolz mitre cutter after reading some good reviews on it. Have struggled a bit getting 1394 nose guard done with the angles and size involved, thought this might help future proj
Posted Images
59 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.