Christoph1972 Posted January 12, 2020 Posted January 12, 2020 Hey guys, I like to introduce my Krampe TW 900 tipper. This type is one of my favourites tippers. So I decided to rebuild them in scale 1:32. Let’s the pictures speak: Here some pictures of the building phase: Here some pictures of the paint job. I had really really trouble with the paint job. The paint job of the back door was pretty good. But than I ran into multiple issues. A white film was on the paint. And there where cracks in the paint. I decided to sand the whole tipper, and respray them with a filler. The sanding was a really ugly job but necessary. I started to paint the tipper new, but I runs into issues again….. I could cry at this point! I decided to remove the whole paint. What a terrible job, I spend hours of hours to remove the paint! It took three runs to got a perfect cover. I was not able to finish the paint job, I was to angry and afraid to get a good result. Finally a friend of mine did the final paint job. But know I am really happy with the result. Tilting is possible. I look forward to your replies! Kind regards Christoph
FendtFarmer Posted January 12, 2020 Posted January 12, 2020 Nice job there, nice colour blue used as well
sipher172 Posted January 12, 2020 Posted January 12, 2020 Great build, the details are great. I dont think I would have had the patience's to sand down and repaint the trailer like you did.
Christoph1972 Posted January 13, 2020 Author Posted January 13, 2020 Thank's a lot for the nice replies! @0025 Please can you remove the pictures from your full quote? All pictures are double now!
smithy Posted January 13, 2020 Posted January 13, 2020 Really nice build ,shame you had the issues but it turned out ok in the end ,well done
Recommended Posts
Archived
This topic is now archived and is closed to further replies.