New Hollander

Finally your prayers have been heard! 🥰

Rostselmash now even puts Chinese engines in the good old New Holland Versatiles And no more Deutz or Cummins engine in this Belarus

The Chinese are taking their chances now that the Western brands have pulled back from the Russian market because of the sanctions. Multiple brands unknown to us have showed up lately. The largest dairy farmer in Russia with ca 100,000 cows, who is also the largest John Deere dealer is now selling Lovol. At the Agritechnica Lovol showed a 240 hp CVT tractor and an 11 l engine and CVT developed in house for a tractor with 380 hp. It's not ready for the European market yet. Believe it said end of this year. This is the 1/1 tractor in China. They're already making this 1/24 version, now let's hope they learn the European market wants 1/32: BTW, the Liugong is based on a loader, with a 9 l Cummins engine and hydrostatic gearbox: And here's a 350 hp hybrid Liugong: And a 440 hp KAT 4404 at 173,000 GBP: And a 300 hp KAT 3004 with 16+4 synchro gearbox at 134,000 GBP: 400 hp YTO under development: 300 hp YTO with ZF 40+40: Most European is this Zoomlion with a Deutz 230 hp engine and ZF 40+40 introduced at Agritechnica 2015:

Recently put UH MF 6475 tyres under the TW-15 and I guess these tyres are the same. Previously had McC MTX tyres under it but these are a better match. Wanted a little wider ones under the 8730 but may consider these. Thanks for the advice, Ben. Looks like there's a colour difference between the TW-15 (7610) and 8730 cab, so no door swap unfortunately... I believe the colour of the Marge TW-25/35 is a bit lighter. The 8730 is missing the 3pl, was thinking of putting a Replicagri NH TM 3pl on it. Now I'm thinking this is a pre-production prototype.

Picked up this Marge Ford 8730 and a Tabmodels Ford 7000 skid unit. The 8730 needs some work. Not sure what happend with it. Curiously it has the door handles and mirrors of the bubble cab TW's. Going to swap the doors with my TW-15 and maybe some wider and higher rear tyres.

Could also have happened at Deere. Unions were trying to make a point. Imagine what would happen when farmers would have a strike for 260 days.

Backlog was caused by a 260 day! strike at the Racine plant but you're right that not everywhere it's green.

due autumn winter it says. It's about time. NH isn't even selling the T8 in Holland anymore.

and a new Magnum 405 Case hasn't even anounced yet

Yes. that's cheating 😄 but what's with the 8400? It looks smaller than the 7810. Do you also have the US version of the 8400 to compare side by side?

New Holland Style. New Holland 1:32 Scale Model T4FCab next shipment will arrive December 19th it says.

Nice models Callum. Any idea who makes the PZ mower? Is that Minitrac?

it was for sale at the Agritechnica

what an idiot...... May have ruined a good set of tyres, and then just leave the concrete blocks on the road. Wonder what the police 'll do with this bloke.

the model has what we call square wheels at the rear. Not sure but I think the early 8210's had 8 point dishes and the later ones square. 6 point in the front is correct although I would have set them at a wider track width.

Regarding width of the bonnet I think that is because of the angle of the pic. Not sure about the angle of the bonnet though. I think it should slope a bit more in front of the exhaust. Slope of the dashboard cowling isn't correct too. I'm also missing the fuel filler cap. You're correct about the roof. Front wheel driveshaft protection looks too wide. Wheels are ok but I'm not a real fan of these tyres. Especially the front look a bit small. Maybe Schuco uses them on another model. Not sure if they can be switched. Front weights are sitting at the wrong angle and the middle one is too wide. All in all not sure about this one. UH have announced one ages ago but still not on the market. Working on a 8210 at the moment but after seeing this one that's going to be a Generation III. What are your thoughts on resin? Have a NH TG285 that my dad dropped accidentally. Only small bits broken off but it ruined the model and made it worthless imo.

do you have a link to that? Not really familiar with instagram

what are you going to do about the grey around the windows?

Can the front lift be taken off or is it integrated in the chassis?

Are you sure it was Schuco? Schuco is a German company. Why would they want to go to the UK to measure up a tractor while there are still many around in Germany?

Saw the post on agrarmodellbau.de. This is just a wishlist!

Check out the pictures of MF 3690's on Google. The wheel arches of the 3690 are wider than the 3080. I think you used Fendt 514 tyres in the first pics. Those were 38 inches, not sure if they were 600 or 650 mm wide. 42 inches or 710/70R38 look better in my opinion. You might change the front wheels too for a bit chunkier ones and put the front arches higher. It makes the bonnet sit a bit higher. I think that would solve it.

Here's a better link to the map. https://www.agritoy.nl/downloads/613b0576-28c9-4c3c-a8cc-5834adfa02ad Who's coming?

That's correct.

just wondering what it is with the manufacturers these days. They want to sell at premium prices but they don't seem to have their quality control in order. Are they trying to cut corners or what? Today again I saw two examples: the Replicagri NH TM165 with blue/yellow decals and Marge Steyr 8120 SK2 2wd. Just two models that never existed from the original manufacturers.