Paul Palmer Posted February 2, 2011 Share Posted February 2, 2011 with the fendt 939,looks like my wish has appeared,definately on my shopping list Quote Link to comment Share on other sites More sharing options...
mr softie Posted February 2, 2011 Share Posted February 2, 2011 the loader on the 7430 looks good roll on it being released Quote Link to comment Share on other sites More sharing options...
AJH Posted February 3, 2011 Share Posted February 3, 2011 Quote Link to comment Share on other sites More sharing options...
AJH Posted February 3, 2011 Share Posted February 3, 2011 Quote Link to comment Share on other sites More sharing options...
robbo Posted February 3, 2011 Share Posted February 3, 2011 At the risk of being pedantic, the rear wheels are on the wrong way on the John Deere loader tractor, hopefully they will get it right for the general release. ;) Quote Link to comment Share on other sites More sharing options...
roberthenning Posted February 3, 2011 Share Posted February 3, 2011 At the risk of being pedantic, the rear wheels are on the wrong way on the John Deere loader tractor, hopefully they will get it right for the general release. ;) And the front grill guard is every so slightly too big. But all in all it will be the one model i'll really be wanting in 2011, love the rear weight too Quote Link to comment Share on other sites More sharing options...
griffithsbros Posted February 3, 2011 Share Posted February 3, 2011 i notice that the bucket on the loader has the same type of linkage as the siku loaders Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted February 3, 2011 Share Posted February 3, 2011 At the risk of being pedantic, the rear wheels are on the wrong way on the John Deere loader tractor, hopefully they will get it right for the general release. ;) you know what mike, there are some forums that would have you banned for a comment like that :D no one has noticed that the bonnet decal says 7430 :of :of thats a 6930 for sure Quote Link to comment Share on other sites More sharing options...
ploughmaster Posted February 3, 2011 Share Posted February 3, 2011 Why exactly is it not a 7430??? I have looked hard at various pictures (and have recently spent a few days driving a 7530), and I can't see quite what is so wrong with it. Even as a re-decal on the 6930 model, the 40mm greater length and a 120mm greater height of the real thing don't make a big difference in 32nd, and I can't really tell them apart otherwise \ As to the wheels being the wrong way round, some operators do turn one set of wheels the other way round to improve traction in reverse when using a loader in sticky conditions, although they normally turn the front set. Quote Link to comment Share on other sites More sharing options...
mrol Posted February 3, 2011 Share Posted February 3, 2011 What show were all the pictures taken at Atte? Also any insight as to whether the Wiking NH T8 rumours are true? Quote Link to comment Share on other sites More sharing options...
AJH Posted February 3, 2011 Share Posted February 3, 2011 Spielwarenmesse. And there isn't a T8... Quote Link to comment Share on other sites More sharing options...
catkom3 Posted February 3, 2011 Author Share Posted February 3, 2011 ;D ;D Never mind all that John Deere malarky,It's a Samson SG 28 with dribble bar 8) 8) Regards Joe. Quote Link to comment Share on other sites More sharing options...
mrol Posted February 3, 2011 Share Posted February 3, 2011 The samson seems to have it's front wheels off te ground - wonder if the geometry is a bit out on the hitch? I thought the T8 would be a myth - it's not German made for a start. Let's hope the Siku or Ertl versions are half decent...although I'm not holding my breath based on track record. It's a shame all the new NH stuff is being made by the toy rather than model makers (G240 excepted). Quote Link to comment Share on other sites More sharing options...
ploughmaster Posted February 3, 2011 Share Posted February 3, 2011 Is it perhaps a lift axle and in the photo is in the raised position ?? Quote Link to comment Share on other sites More sharing options...
catkom3 Posted February 3, 2011 Author Share Posted February 3, 2011 The Samson SG28,does have hydraulic lift on the front axle, Regards Joe. Quote Link to comment Share on other sites More sharing options...
griffithsbros Posted February 3, 2011 Share Posted February 3, 2011 knowing the detail that wiking go to i would say it was a lift axle Quote Link to comment Share on other sites More sharing options...
Tommy Gough Posted February 3, 2011 Share Posted February 3, 2011 Is it perhaps a lifrt axle and in the photo is in the raised position ?? Ah you beat me to it, that was going to be my sugestion. I do like the look of it but not sure if i can allow the buget to strech that far. Quote Link to comment Share on other sites More sharing options...
Fendt Fahrer Posted February 4, 2011 Share Posted February 4, 2011 It's a must ;D Quote Link to comment Share on other sites More sharing options...
mr softie Posted February 4, 2011 Share Posted February 4, 2011 ;D ;D Never mind all that John Deere malarky,It's a Samson SG 28 with dribble bar 8) 8) Regards Joe. i get a feeling joe is one happy man Quote Link to comment Share on other sites More sharing options...
catkom3 Posted February 4, 2011 Author Share Posted February 4, 2011 ;) Ah Brian,you noticed,happy as a pig in .... I guessed as soon as it was announced it had to be the SG28=28.000 litres = 6000 gallons = 26 ton,there's no other model implement big enough for the 5000,the "wing's" on that thing will be almost a metre wide,far to big for most collection's,but, I have a wee diorama in mind for it, Regards Joe. Quote Link to comment Share on other sites More sharing options...
Fendt Fahrer Posted February 5, 2011 Share Posted February 5, 2011 That Samson is going to be some serious kit and I too have to have that :P :P . I have been looking for something to put behind my 5000. This is a marriage made in heaven. Quote Link to comment Share on other sites More sharing options...
catkom3 Posted February 5, 2011 Author Share Posted February 5, 2011 I'm with you Markus,absolutely must have,it's the only reason Wiking did the Xerion 5000 ;D remember this,2009 I think, Regards Joe. Quote Link to comment Share on other sites More sharing options...
jordantaylor Posted February 5, 2011 Share Posted February 5, 2011 well i will be purchasing one of those john deeres but will have to make a potato box turner for it Quote Link to comment Share on other sites More sharing options...
AJH Posted February 8, 2011 Share Posted February 8, 2011 Pictures from Modell-Trecker: Quote Link to comment Share on other sites More sharing options...
catkom3 Posted February 8, 2011 Author Share Posted February 8, 2011 ;D Thank you Atte,your a star,Model of the Year that Samson Regards Joe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.