Paul Palmer Posted July 18, 2020 Share Posted July 18, 2020 yep Joe is right ,on the real deal there seems to be no other indicators on the machine Link to comment Share on other sites More sharing options...
Pete132 Posted July 18, 2020 Share Posted July 18, 2020 8 hours ago, 1/32 said: Must be, that’s good I suppose. I have a new set of beacons on the way and then it will be sorted. Deffo not of the cougar Link to comment Share on other sites More sharing options...
trigger82 Posted July 18, 2020 Share Posted July 18, 2020 Link to comment Share on other sites More sharing options...
FendtFarmer Posted July 19, 2020 Share Posted July 19, 2020 Well since my last update had a bit of a spending spree.... britains John Deere 8rx and 8400r Universal hobbies weeks small and grain versions universal hobbies Bauer irrigator wiking John Deere 6125r with and without loader, Kuhn big square baler, and 7430 fendt 716 gen 2 wiking claas lexion 760 North American edition Link to comment Share on other sites More sharing options...
0025 Posted July 19, 2020 Share Posted July 19, 2020 Usk Claas Cargos 8400 Usk Claas Atos 350 Uh Case IH MX150 Link to comment Share on other sites More sharing options...
CX820Joe Posted July 20, 2020 Share Posted July 20, 2020 Had another Britains Loadall 550-80. Paul P/Barry - will measure the wheels later when it's out of the box Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 20, 2020 Share Posted July 20, 2020 8 minutes ago, CX820Joe said: Had another Britains Loadall 550-80. Paul P/Barry - will measure the wheels later when it's out of the box cheers Joe Link to comment Share on other sites More sharing options...
CX820Joe Posted July 20, 2020 Share Posted July 20, 2020 I've measured the wheels as best I can, measurements as follows, measurements are firstly the rim, and then the whole wheel: 550-80 2.1cm/4.5cm 542-70 2.2cm/4.0cm TM420 2.1cm/4.3cm I hope the measurements help, not sure whether the tyres can be swapped between any of them though? Link to comment Share on other sites More sharing options...
robbo Posted July 21, 2020 Author Share Posted July 21, 2020 Had to go and collect this today, an ebay buy Link to comment Share on other sites More sharing options...
Barry Posted July 21, 2020 Share Posted July 21, 2020 15 hours ago, CX820Joe said: I've measured the wheels as best I can, measurements as follows, measurements are firstly the rim, and then the whole wheel: 550-80 2.1cm/4.5cm 542-70 2.2cm/4.0cm TM420 2.1cm/4.3cm I hope the measurements help, not sure whether the tyres can be swapped between any of them though? Cheers Joe, worth buying a 550 and having a go......will wait for a second hand one to pop up on eBay (missed out on one a few days ago....forgot about it finishing!!) Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 21, 2020 Share Posted July 21, 2020 thanks Joe,looks like they will swap Link to comment Share on other sites More sharing options...
justy 46 Posted July 21, 2020 Share Posted July 21, 2020 Britains Case Optum 300.. Link to comment Share on other sites More sharing options...
Barry Posted July 22, 2020 Share Posted July 22, 2020 One of these arrived this morning, first impressions are.....wow, what a model, looks so much better on these tyres than the previous model, this is a casting I would be happy for them to exploit with all manor of variations they could think of!!!! 10/10 would recommend........think i'll buy a few more too Now do the same model with front mudguards on it!! Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 22, 2020 Share Posted July 22, 2020 looks nice Barry,what were wrong with the tyres on the previous model? Link to comment Share on other sites More sharing options...
bluegreen Posted July 22, 2020 Share Posted July 22, 2020 They were the skinny ones Paul , looked naff...……………………...These wheels weren't available until the side stack 55 series machines got released in the early 90s, so even though schuco fitted them on the 4850 they certainly weren't available back in the 80s when the 4650/ 4850 were in production...…………...but other than me who cares Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 22, 2020 Share Posted July 22, 2020 well its nice to know Phil Link to comment Share on other sites More sharing options...
AndyB Posted July 23, 2020 Share Posted July 23, 2020 On 7/22/2020 at 2:15 PM, Barry said: One of these arrived this morning, first impressions are.....wow, what a model, looks so much better on these tyres than the previous model, this is a casting I would be happy for them to exploit with all manor of variations they could think of!!!! 10/10 would recommend........think i'll buy a few more too Now do the same model with front mudguards on it!! Have to agree, it's a cracker, managed the time to get one out tonight, just missing the front mud guards as you say and part of me would like more lenses for lights instead of painted on. The interior detail is very good indeed. Me too, happy for Schuco to milk the casting for other versions! Link to comment Share on other sites More sharing options...
bluegreen Posted July 23, 2020 Share Posted July 23, 2020 Its just a shame that the schuco rear linkage on these and the 7810 etc are about as much use as a chocolate fireguard Link to comment Share on other sites More sharing options...
alf aphid Posted July 23, 2020 Share Posted July 23, 2020 On 7/16/2020 at 12:27 PM, robbo said: I have emailed the seller to ask if he has got postal insurance or if it can be replaced so I will see what he says. I have tried to glue the exhaust back into place but it looks awful Sorry I’ve been a pre occupied lately. What model is this ? Link to comment Share on other sites More sharing options...
robbo Posted July 24, 2020 Author Share Posted July 24, 2020 10 hours ago, alf aphid said: Sorry I’ve been a pre occupied lately. What model is this ? It is the latest release from ModelAgrisystem https://www.modelagrisystem.it/shop_elencoprodotto.asp?inttipo=1&selectcategoria=1&selectsottocategoria=87 The Lamborghini version is due in September Link to comment Share on other sites More sharing options...
alf aphid Posted July 24, 2020 Share Posted July 24, 2020 Thank you! very nice indeed. Sadly will have to refrain for the time being ! Link to comment Share on other sites More sharing options...
CX820Joe Posted July 24, 2020 Share Posted July 24, 2020 I've managed to unpack the Commandor and have a look at it today. It's not a bad model, seems quite light, especially compared to my other combine, the Deutz C9206. It's not as well detailed as the Lexion, and I'm not so keen on the front wheels, but I think it's worth the price I paid. I've seen the general release 116 for as much as 145 quid, I wouldn't say its worth that. The connections between the grain tank lids are quite poor and need reattaching fairly regularly though. Link to comment Share on other sites More sharing options...
Paul Palmer Posted July 25, 2020 Share Posted July 25, 2020 uh new holland T7.225,britains silver fastrac and the imber ford 6640 i won from brushwood,and britains new holand baler Link to comment Share on other sites More sharing options...
chris.watson Posted July 25, 2020 Share Posted July 25, 2020 On 7/16/2020 at 2:23 AM, 1/32 said: I’ve been looking for one of these for a while now. I’m very pleased with it other than a missing beacon and a part I can’t find a spot for that was floating in the box. Does anyone else with one of these Cougars have an idea? On 7/18/2020 at 3:30 PM, 1/32 said: Must be, that’s good I suppose. I have a new set of beacons on the way and then it will be sorted. I have this model, I’ve had a good look and can confirm you have a loose part from another model in the box. Link to comment Share on other sites More sharing options...
chris.watson Posted July 25, 2020 Share Posted July 25, 2020 On 7/17/2020 at 9:22 PM, bluegreen said: Hmmm, not one of those shows the header in a raised position or the grain lids up or the rear wheels in a turned position?? And it should be a darker red, but maybe its just the lighting, hence my request of pictures that someone has taken having bought one to see if my concerns are unfounded Here’s a few of mine mate, pics to correspond with your questions. No opening lid. I love the model. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.