Tractorman810 Posted November 28, 2022 Author Share Posted November 28, 2022 loads of 3 d resin printed bits, very very happy with the cultivator and the discs, have been after something like this for a while for the layout, to match up with some on going tractors out the shed, 2 full sets of patv mf wheels, pair of 3680/90 bonnets for a half done chassis in the shed, a mf 2605 bonnet with the holes all on the right side for the uk ones, and a ap cab for a marge chassis i have had kicking round for a while, which i needed a use for 5 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted November 28, 2022 Author Share Posted November 28, 2022 a load of tyres(weise toys michellin branded) that fit the patv rims, and a set of replicagri renault rims and a set of replicagri duals rims from a 844? so smaller ,both for a future jobs, plus 2 sets of origonal britains nordsten drill markers, found in a scrap box for 1 euro the lot 2 Quote Link to comment Share on other sites More sharing options...
super6 Posted November 28, 2022 Share Posted November 28, 2022 9 minutes ago, Tractorman810 said: a rear digger with a unusal orange seat, only seen blue and black, not sure what they did with orange seats, but its not a repo one Orange seat found on grey coloured Ford 6600 with orange wheel centres and grill Quote Link to comment Share on other sites More sharing options...
Pete132 Posted November 28, 2022 Share Posted November 28, 2022 What were zwolle prices like? Quote Link to comment Share on other sites More sharing options...
robbo Posted November 28, 2022 Share Posted November 28, 2022 12 minutes ago, Pete132 said: What were zwolle prices like? Most of the new stuff was the same or similar at most sellers and fairly standard prices. Some of the older stuff varied wildly and you had to have a good look around to get the best price. Only problem with that is when you then go back to the cheaper seller is was quite often already sold. 2 Quote Link to comment Share on other sites More sharing options...
Pete132 Posted November 28, 2022 Share Posted November 28, 2022 I know well, nothing worse than spotting something you fancy and saying you will get it after a look around only to find it gone on your return it looks like there was plenty to buy tough 1 Quote Link to comment Share on other sites More sharing options...
Dougerr76 Posted November 29, 2022 Share Posted November 29, 2022 More new additions to my collection John Deere 8R 410 by Wiking, Class Le Mans edition 660 in Gunmetal Black and Gunmetal Grey both by Wiking. Fall Farm show Models Case IH Magnum 380 Black night Demo and John Deere 9R 590 both by Ertl 5 Quote Link to comment Share on other sites More sharing options...
smithy Posted November 29, 2022 Share Posted November 29, 2022 On 11/25/2022 at 5:28 AM, Dougerr76 said: Finally some good photos of the U.H Valtra Q !!! looks amazing by chance do you know the Valtra part #? Here is a few more photos for you 6 2 Quote Link to comment Share on other sites More sharing options...
CX820Joe Posted November 29, 2022 Share Posted November 29, 2022 1 hour ago, smithy said: Here is a few more photos for you Lovely...if one comes out without the black rims I'd definitely be interested. Quote Link to comment Share on other sites More sharing options...
smithy Posted November 29, 2022 Share Posted November 29, 2022 1 hour ago, CX820Joe said: Lovely...if one comes out without the black rims I'd definitely be interested. The white one has white rims 1 Quote Link to comment Share on other sites More sharing options...
robbo Posted November 29, 2022 Share Posted November 29, 2022 Can't believe that I forgot these two 🤐 Some time ago I was trawling Facebook and I saw a post that a guy had done 3 conversions of the Same Antares 130, one with a front weight frame, one with front linkage and one with twin rear wheels. I messaged him at the time and asked if he would be going to Zwolle but heard nothing back from him. Whilst I was there last weekend I got a message to say that Goody might be ringing me as he had been offered some conversions that I might be interested in. At the time I didn't put 2 and 2 together so I had no idea what these conversions were. Anyway, some time later I received the call and I went over to where Goody and Smithy had their stall to be shown the aforementioned Antares models, spooky or what! They appear to be based on the Siku Same 265/MF9240 model so a good solid base if a little sparse but, nobody else has done the Antares (as yet anyway). The short account is that I agreed to buy the front weight frame and front linkage versions whilst Smithy had the twin wheeler, I will leave him to post photos of that one. 6 Quote Link to comment Share on other sites More sharing options...
smithy Posted November 29, 2022 Share Posted November 29, 2022 Haha you mean this one 6 Quote Link to comment Share on other sites More sharing options...
phil phoenix Posted November 29, 2022 Share Posted November 29, 2022 Thanks for the Valtra pictures Smithy, Top man😎 The front rims and tyres are the same as the MF 8s model. Thankfully they didn't copy the duff 8s rears. It really is a top notch model, and as for wheel colours we all know they will produce the models in several colours with different rim colours as well. And even then you could buy two with different rims (black or white) colours and swap them over to get the combination you want. But why are we not hearing about the model's release yet?? Are they "Show only" model's, or do they have to allow Britains a few months headstart with their much cheaper Q305 due to licensing etiquette?? 1 Quote Link to comment Share on other sites More sharing options...
phil phoenix Posted November 29, 2022 Share Posted November 29, 2022 7 hours ago, smithy said: The white one has white rims There was a white one for sale as well??? Is that right Smithy. Quote Link to comment Share on other sites More sharing options...
Dougerr76 Posted November 30, 2022 Share Posted November 30, 2022 18 hours ago, smithy said: Here is a few more photos for you Thanks Smithy I will have to reach out to a Valtra dealer and see if they can be ordered really want to add both versions to my collection. 2 Quote Link to comment Share on other sites More sharing options...
Dougerr76 Posted November 30, 2022 Share Posted November 30, 2022 7 hours ago, phil phoenix said: Thanks for the Valtra pictures Smithy, Top man😎 The front rims and tyres are the same as the MF 8s model. Thankfully they didn't copy the duff 8s rears. It really is a top notch model, and as for wheel colours we all know they will produce the models in several colours with different rim colours as well. And even then you could buy two with different rims (black or white) colours and swap them over to get the combination you want. But why are we not hearing about the model's release yet?? Are they "Show only" model's, or do they have to allow Britains a few months headstart with their much cheaper Q305 due to licensing etiquette?? It seems Valtra is the last one of the Agco family to add Farm show releases to they're online store directly following the show. It seems that any left over models from the show are added to the MF and Fendt shop a day or two after the show while Valtra's take weeks. 1 Quote Link to comment Share on other sites More sharing options...
smithy Posted November 30, 2022 Share Posted November 30, 2022 11 hours ago, phil phoenix said: There was a white one for sale as well??? Is that right Smithy. Yes there was a white one same model as the black one for sale at sima , Sima show was 6th November -10th November Phil . There was another model of the Q305 on show which is going to be released in 2023 and ltd to 1000 pieces ,people on the stand spoke very little English so i think that is correct 1 Quote Link to comment Share on other sites More sharing options...
catkom3 Posted November 30, 2022 Share Posted November 30, 2022 Probably worth keeping an eye on the Valtra online shop, https://shop.valtra.com/en/models-toys.html Regards Joe. Quote Link to comment Share on other sites More sharing options...
phil phoenix Posted November 30, 2022 Share Posted November 30, 2022 (edited) Thanks for the info guys. Logic suggests that given the amount of promotion Valtra are aiming at January's Lamma show at the NEC, they will surely have some more Qs available for sale there. Edited November 30, 2022 by phil phoenix 1 Quote Link to comment Share on other sites More sharing options...
CallumC Posted December 3, 2022 Share Posted December 3, 2022 These two arrived home yesterday. I've been after them since I first saw them back in 2004. but I've either been out bidded or they have been mega money. But these very good condition unboxed ones came in at a fair enough price. If anyone happens to have the little extension part for the mixers spout please give me a message 5 Quote Link to comment Share on other sites More sharing options...
Dusty Dan Posted December 3, 2022 Share Posted December 3, 2022 1 hour ago, CallumC said: These two arrived home yesterday. I've been after them since I first saw them back in 2004. but I've either been out bidded or they have been mega money. But these very good condition unboxed ones came in at a fair enough price. If anyone happens to have the little extension part for the mixers spout please give me a message Nice trucks! 1 Quote Link to comment Share on other sites More sharing options...
Mike R Posted December 3, 2022 Share Posted December 3, 2022 1/16 UH County 654 1 Quote Link to comment Share on other sites More sharing options...
justy 46 Posted December 3, 2022 Share Posted December 3, 2022 Picked up this Kuhn Harrow today at Model swap meet in Ballincollig. 3 Quote Link to comment Share on other sites More sharing options...
trigger82 Posted December 4, 2022 Share Posted December 4, 2022 9 hours ago, justy 46 said: Picked up this Kuhn Harrow today at Model swap meet in Ballincollig. Was there much stuff at it Quote Link to comment Share on other sites More sharing options...
justy 46 Posted December 4, 2022 Share Posted December 4, 2022 1 hour ago, trigger82 said: Was there much stuff at it Very little in terms off Agri models. it's was kinda more suited tithe railway modelers.. But it was only 10 minutes away so just popped in for a quick look. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.