Stabliofarmer Posted August 5, 2015 Share Posted August 5, 2015 Any plans for the mog Mark? I've just bought another for a lime spreader conversion Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted August 8, 2015 Share Posted August 8, 2015 A rather sad looking Britains Case ih 600 quadtrac as it's all in bits Good runner, straight from farm, one owner machine. Needs some minor tlc? 2 Quote Link to comment Share on other sites More sharing options...
mb86 Posted August 8, 2015 Share Posted August 8, 2015 Good runner, straight from farm, one owner machine. Needs some minor tlc? Very genuine, local machine, must be seen Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted August 10, 2015 Share Posted August 10, 2015 Very genuine, local machine, must be seen This man knows what I mean, it's Quite Fascinating. 1 careful driver and 10 that didn't give a s##t Just like buying a used car! 1 Quote Link to comment Share on other sites More sharing options...
mb86 Posted August 10, 2015 Share Posted August 10, 2015 This man knows what I mean, it's Quite Fascinating. Just like buying a used car! Quite Frankly I think you are right. Quote Link to comment Share on other sites More sharing options...
timms Posted August 11, 2015 Share Posted August 11, 2015 (edited) fiddeling around earlier making wall sections Edited August 11, 2015 by timms 7 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted August 20, 2015 Share Posted August 20, 2015 had a bit of free time today, so managed to get the ford 5000 glazed, need to redo the front screen again mind as the hump at the bottom has a gap ,just need to get some glue Saturday to final fix them 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Tractorman810 Posted August 20, 2015 Popular Post Share Posted August 20, 2015 also started a second ford 5000, hopefully it will be a ford front loader, but I may yet do it as a red mill one, the rams are temp ones so I could set the mounts properly, with the tip ram again temp, will be using my usual method rams for the final ones, also got the spreader primed up, going to go SKH for it, so need to get a nice orange paint for it, plus find what colour the wheels need to be for it 12 Quote Link to comment Share on other sites More sharing options...
WillTEF20 Posted August 21, 2015 Share Posted August 21, 2015 All looking very nice Sean, at work we have a SKH side spreader and the wheels are the same colour as the rest of the spreader. I know a different model but might be a similar theme for all the spreaders....? Quote Link to comment Share on other sites More sharing options...
Niels Posted August 21, 2015 Share Posted August 21, 2015 Lovely work Sean. Fantastic models! Quote Link to comment Share on other sites More sharing options...
mb86 Posted August 21, 2015 Share Posted August 21, 2015 Fantastic work Sean. Will we see these in a diorama when finished? Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted August 21, 2015 Share Posted August 21, 2015 Thats great thanks will , i have found this version in skh, but the brouchures in black and white Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted August 21, 2015 Share Posted August 21, 2015 Cheers neils, you may do martin, time will tell, have an idea for a multi use small board for shows maybe?? But really need to finish some other bits before i do anything about that , the work bench is only so big 2 Quote Link to comment Share on other sites More sharing options...
roberthenning Posted August 22, 2015 Share Posted August 22, 2015 Two artisan trailer chassis to use for my red rock and weeks trailers 1 Quote Link to comment Share on other sites More sharing options...
smithy Posted August 31, 2015 Share Posted August 31, 2015 £9.99 job from Amazon a JCB 416 farm master, Didn't like that the bucket couldn't be posed as tipped when fully raised so converted into a hi tip bucket. IMGP1140.JPGIMGP1141.JPGIMGP1145.JPG Good to see you are still converting models and posting on here Mark nice job you have there I sometimes drive a Volvo L70 with a bucket like that loading sugar beet 1 Quote Link to comment Share on other sites More sharing options...
Old Ford Posted August 31, 2015 Share Posted August 31, 2015 Nice work Mark. 1 Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted August 31, 2015 Share Posted August 31, 2015 nice job again Mark 1 Quote Link to comment Share on other sites More sharing options...
Jd6320driver Posted August 31, 2015 Share Posted August 31, 2015 looks well might have to do my one up 1 Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted September 1, 2015 Share Posted September 1, 2015 Very nice job on the toe tip bucket Mark, will you add some more details to the loading shovel as well? 1 Quote Link to comment Share on other sites More sharing options...
mb86 Posted September 1, 2015 Share Posted September 1, 2015 Nice work mark. It annoys me how some models won't tip in the raised position. Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted September 1, 2015 Share Posted September 1, 2015 (edited) Made a few fence posts to get knocked in Then pimped my Wiking 7430, added some more worklights, number plate into the correct side and put the toolbox in its proper place. Need some 7530 decals now Edited September 1, 2015 by Jdeere6910 4 Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted September 1, 2015 Share Posted September 1, 2015 Thanks for POSTING them Pat No problem Mark, not much but I'm enjoying a bit of tinkering on my day off Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted September 1, 2015 Share Posted September 1, 2015 Made a few fence posts to get knocked in image.jpg Then pimped my Wiking 7430, added some more worklights, number plate into the correct side and put the toolbox in its proper place. Need some 7530 decals now image.jpgimage.jpgimage.jpg nice one Pat Quote Link to comment Share on other sites More sharing options...
Jdeere6910 Posted September 1, 2015 Share Posted September 1, 2015 nice one Pat Thanks Paul, trying to decide wether to put a front linkage on it or not Quote Link to comment Share on other sites More sharing options...
powerrabbit Posted September 1, 2015 Share Posted September 1, 2015 I don't know what's on my workbench, it's a foot deep in rubbish! 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.