Deere-est Posted March 21, 2011 Share Posted March 21, 2011 well now the lely is nearly done, i have been back tampering with a few outstanding builds, first up a 590 2wd, chassis has been shortened and drive shaft removed from underneath, will be a 2 tone cab single door option once done, I aint to happy with the wheels all round, and do have a possable second option for the rears but need to get my Bum in gear and do the second one, or cast the first as to me the 1200 ones look to big Mmmmm I got to be honest with you here Sean .. ... you'll struggle with the wheels if you try to make them any other shape that round. . ... Square ones never really got rolling if you know what I mean. .. . :laugh: :laugh: : : Anyhow . . Like the Ford and trimmer combination mate, very nice indeed and the axle brackets and linkage will just top that all off a treat. The door on the Massey though, what did you cut it with. . ... a brick?! Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 21, 2011 Share Posted March 21, 2011 breeze block mate, lot easier than a 4" angle grinder [ :laugh: :laugh: na the bottom pins dropped out somewhere so it wont sit properly at present, does shut pretty flush once its in , may try and get the ford bush wacker combo done for spalding?? see how i get on time wise Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 21, 2011 Share Posted March 21, 2011 as requested a coule of the marshal as it stands at present the drill at present one of the jd's to cant find pics of the other Quote Link to comment Share on other sites More sharing options...
DBfan Posted March 22, 2011 Share Posted March 22, 2011 thanks for the pics of the marshal very nice job Quote Link to comment Share on other sites More sharing options...
masseyjack590 Posted March 22, 2011 Share Posted March 22, 2011 i like the look of that how many metres will it be 5 or 6 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 22, 2011 Share Posted March 22, 2011 pretty sure i scaled it for a 5 m ,got a load of uh seeder bits for the coulters underneath, along with rams to lift and drop them, although i need to re do the transport wheels with a new ram, as its not really man enough for the job at present Quote Link to comment Share on other sites More sharing options...
masseyjack590 Posted March 22, 2011 Share Posted March 22, 2011 nice i thought about improving the coulters etc when when i made the bridge link for mine but couldn't be bothered so i just resprayed it i saw a nice 1:43 scratch built one on gtp here's the link http://forum.grostracteurspassion.com/viewtopic.php?f=123&t=28292 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted March 22, 2011 Share Posted March 22, 2011 i am hopeing by doing this uh will take notice and do a proper run of them for us : :laugh: Quote Link to comment Share on other sites More sharing options...
masseyjack590 Posted March 22, 2011 Share Posted March 22, 2011 hopefully but then that'll be another thing to add the list of stuff i want but can't afford Quote Link to comment Share on other sites More sharing options...
IH885XLMAN Posted March 24, 2011 Share Posted March 24, 2011 just some casting 8) 8) 8) perfect detail in every way and the wheels ish done the ford 5000aswell Quote Link to comment Share on other sites More sharing options...
Tommy Gough Posted March 24, 2011 Share Posted March 24, 2011 just weathered some old jenga block i found a while ago. They will hopefully be turned into a poo pit in the near future, like this trial: Quote Link to comment Share on other sites More sharing options...
nashmach Posted March 25, 2011 Share Posted March 25, 2011 Some nice work there Sean. Like that 7810 especially. I guess the 590 door got caught in a gatepost Quote Link to comment Share on other sites More sharing options...
MPR Models Posted March 25, 2011 Share Posted March 25, 2011 Case IH 7250 Magnum Pro.. Nice work by the way Sean Quote Link to comment Share on other sites More sharing options...
Kiwi6920 Posted March 28, 2011 Share Posted March 28, 2011 3 Tcab scanias one is a trator unit other 2 tippers, just in for the panit and one chassis chomp.... Quote Link to comment Share on other sites More sharing options...
unkelfergus Posted April 15, 2011 Share Posted April 15, 2011 At the moment,....3 buckrakes,...awaiting decals,....to be done later if I am sober enough..(Cerin's early birthday meal) one jcb 526 loadall carriage conversion,...slightly different to the one I did before.... ......and an ALLIGATOR.................or three.... Quote Link to comment Share on other sites More sharing options...
PDC Posted April 29, 2011 Share Posted April 29, 2011 Nothing at the moment as I've just got a new 6 foot 8 inches worktop for £5 as it had a scratch on it, kicked her out of what was the utility room and now going to be my model room, just got to move all my stuff in it now Nice one Mark, best thing I ever done was make my model shed having your own space to work is great Quote Link to comment Share on other sites More sharing options...
IH885XLMAN Posted May 11, 2011 Share Posted May 11, 2011 new productions on the way can any of you guess wot i want to make ha ha! Quote Link to comment Share on other sites More sharing options...
FNHIR Posted May 11, 2011 Share Posted May 11, 2011 IH885XL? Quote Link to comment Share on other sites More sharing options...
IH885XLMAN Posted May 11, 2011 Share Posted May 11, 2011 IH885XL? and ??? ?? ;D ;D the casts are comming out perfect the wheel might be just for standing models up in production i might call upon the services of NUGEL FORD for wheels and pickup hitches but 5 years in planning and my new shed is poppin em out also thinking of making a few fordson dexter 2000s and 3000s Quote Link to comment Share on other sites More sharing options...
unkelfergus Posted May 11, 2011 Share Posted May 11, 2011 A "fruity" buckrake...........or two..... Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted May 12, 2011 Share Posted May 12, 2011 nearly finished this now, just got to tidy the hydrallic hoses up in bundles with some twine, just waiting for them to set into place before i do that, also think i have found some fine mesh for window guards and need to make a bonnet guard to ,only prob is the paint has set into the fixing brackets on the axels, so sadly its now staying fixed on where as i wanted it removable, but thats minor, pretty amazed the uh fordtakes the weight especially in the transport position, she stays flat on the floor no worrys Quote Link to comment Share on other sites More sharing options...
hotrod192 Posted May 12, 2011 Share Posted May 12, 2011 that looks tidy,brings back childhood memories of being taken for hurls in a 6610. Quote Link to comment Share on other sites More sharing options...
Light Land Posted May 13, 2011 Share Posted May 13, 2011 Looks well that yoak. Quote Link to comment Share on other sites More sharing options...
Fenside MF Posted May 13, 2011 Share Posted May 13, 2011 They look well suited paired up together Sean,smart work as always Quote Link to comment Share on other sites More sharing options...
case 1056xl mad Posted May 14, 2011 Share Posted May 14, 2011 cant beat a good old classic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.