L33 DA17ON Posted September 5, 2020 Share Posted September 5, 2020 Been messing about with a britains unimog. I've been wanting to build one of these since I started messing about thith the britains stuff. Its not perfect as the paint I used was a little thick and has taken ages to dry when I've put it back together its still been soft. 8 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 6, 2020 Share Posted September 6, 2020 very nice lee 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 6, 2020 Share Posted September 6, 2020 well the trailers not far of paint now, just needs a bit of finishing work, and whilst i was out there i decided i didnt like the way the door opened on the 550, so after some swearing, and a few drill holes in my pinkies ,i think i a e cracked it now, the chassis has had a coat of stonelee grey and the bonnets all primed, just need to sort some red paint, cab will stay red topped, domt really want to remove all the door part again, took long enough to get right . 6 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted September 6, 2020 Share Posted September 6, 2020 14 hours ago, L33 DA17ON said: Been messing about with a britains unimog. I've been wanting to build one of these since I started messing about thith the britains stuff. Its not perfect as the paint I used was a little thick and has taken ages to dry when I've put it back together its still been soft. Love that Lee, always fancied something similar. Really brings the general detail of the mog up too. 1 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted September 6, 2020 Share Posted September 6, 2020 Glad to help Sean, trailer is looking lovely! Quote Link to comment Share on other sites More sharing options...
Paul Palmer Posted September 6, 2020 Share Posted September 6, 2020 will be nice to see the 550 finished Sean Quote Link to comment Share on other sites More sharing options...
Janval Posted September 6, 2020 Share Posted September 6, 2020 Attempting to make a Ford 3000, won't be 100% accurate, but decent enough for a hand build I think. 7 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 7, 2020 Share Posted September 7, 2020 bonnet tacked back on for a test fit, needs a good clean of dust wise as well, managed to get the knob on the door handle as well, had to burn the hole out as it was to fiddly to do with a drill bit. 6 Quote Link to comment Share on other sites More sharing options...
844john Posted September 7, 2020 Share Posted September 7, 2020 liking that Sean Quote Link to comment Share on other sites More sharing options...
Popular Post 844john Posted September 7, 2020 Popular Post Share Posted September 7, 2020 A start on the second Fraser trailer, a wooden sided tipper this time, it will have metal grain and silage sides as well 9 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 7, 2020 Share Posted September 7, 2020 1 minute ago, 844john said: liking that Sean cheers john, am a tad annoyed now, as i have just noticed a spot of black on the bonnet, must have had a bit on my pinkies, luckly it will be under the decal though . the red matches well as well, not bad for a spray can of italian red gloss by humbrol Quote Link to comment Share on other sites More sharing options...
844john Posted September 7, 2020 Share Posted September 7, 2020 i just assumed that it was the original paint Sean, that's a very good match actually...and i thought that i was the only one with numb fingers Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 7, 2020 Share Posted September 7, 2020 3 minutes ago, 844john said: i just assumed that it was the original paint Sean, that's a very good match actually...and i thought that i was the only one with numb fingers nearest mf dealers a bit of a drive, so tried this one, humbrol red 19 is close, but this ones a very good match, on a yellow filler primer ,must find the wiper arm as well Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted September 7, 2020 Share Posted September 7, 2020 Braemeare models Bailey hale trailer built this evening. Just needs painting! 9 Quote Link to comment Share on other sites More sharing options...
1/32 Posted September 8, 2020 Share Posted September 8, 2020 Just finished setting up this UH silage blade on a Wiese Xerion. Should have been straightforward but it wasn’t ha ha!. 4 Quote Link to comment Share on other sites More sharing options...
L33 DA17ON Posted September 8, 2020 Share Posted September 8, 2020 8 hours ago, 1/32 said: Just finished setting up this UH silage blade on a Wiese Xerion. Should have been straightforward but it wasn’t ha ha!. Looks tidy that mate. Is there many implements for them? Triple mowers would look cool also. Youve done a tidy job with the blade. Quote Link to comment Share on other sites More sharing options...
1/32 Posted September 8, 2020 Share Posted September 8, 2020 4 hours ago, L33 DA17ON said: Looks tidy that mate. Is there many implements for them? Triple mowers would look cool also. Youve done a tidy job with the blade. Thank you, the rear linkage is well suited for UH type implements, anything that requires a realistic 3 point is a struggle to get on there as was the case on this blade. 1 Quote Link to comment Share on other sites More sharing options...
Janval Posted September 12, 2020 Share Posted September 12, 2020 On 7/5/2019 at 10:23 AM, Tractorman810 said: these of the frame ect any good erik I had quite forgotten about these photos! Downloaded now so that I can get to finishin this front loader, have gotten a brochure for these loaders since then as well! Quote Link to comment Share on other sites More sharing options...
Popular Post 844john Posted September 19, 2020 Popular Post Share Posted September 19, 2020 Fraser 10 tonne grain trailer and 6 tonne grain with silage sides 20 2 Quote Link to comment Share on other sites More sharing options...
GPS Posted September 19, 2020 Share Posted September 19, 2020 Those trailers are looking good John. I seem to have been flat out the past month, with work and some big jobs at home, so not been able to do much else. I did get half an hour the other night to do a little more on the Chamberlain. 6 Quote Link to comment Share on other sites More sharing options...
844john Posted September 20, 2020 Share Posted September 20, 2020 Thanks Gavin! Same here, time for models is certainly at a premium at the moment, hopefully there'll be more time once the nights pull in a bit more, but I'm not wanting that just yet! Looking forward to seeing tour progress on the Chamberlain Quote Link to comment Share on other sites More sharing options...
IH885XLMAN Posted September 25, 2020 Share Posted September 25, 2020 On 9/7/2020 at 5:27 PM, Tractorman810 said: bonnet tacked back on for a test fit, needs a good clean of dust wise as well, managed to get the knob on the door handle as well, had to burn the hole out as it was to fiddly to do with a drill bit. Looking good sean what was the chasis a 135-im guessing or a,240by UH?? Cheers Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted September 25, 2020 Share Posted September 25, 2020 3 minutes ago, IH885XLMAN said: Looking good sean what was the chasis a 135-im guessing or a,240by UH?? Cheers Yes mate uh 135 chassis , have got another out there , and a spare 240 as well, the wheels of the spare 135 chassis are already spoken for with a forth coming tea20 convo i want to do Mind , 1 Quote Link to comment Share on other sites More sharing options...
weblet375 Posted October 1, 2020 Share Posted October 1, 2020 I have added tailgate rams and pipework to my three oaks rw trailer. I am pleased with model and what I have done. 5 Quote Link to comment Share on other sites More sharing options...
Cheshire Farm Models Posted October 1, 2020 Share Posted October 1, 2020 1 hour ago, weblet375 said: I have added tailgate rams and pipework to my three oaks rw trailer. I am pleased with model and what I have done. Great job. Very very nice touch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.