Jack390 Posted November 18, 2022 Share Posted November 18, 2022 Building a small bale trailer with some spare materials I had lying around 3 Quote Link to comment Share on other sites More sharing options...
Jack390 Posted November 19, 2022 Share Posted November 19, 2022 More work on the trailer 3 Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted November 22, 2022 Share Posted November 22, 2022 Bit more done to my Braemere models bailey bale trailer, only took me a couple of years 🤣 cut down to a shorter bed, moved the axles closer together, added a drawbar stand and also added perfect32 rims fitted with Three oaks tyres. 7 Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted November 24, 2022 Share Posted November 24, 2022 First Scaledown kit I've built, have several waiting to be built but always found them too fiddly. Bomford hedge cutter with wide head. Fiddly and awkward build but happy to see it together. Just some paint and hoses to add now 5 Quote Link to comment Share on other sites More sharing options...
Jack390 Posted November 25, 2022 Share Posted November 25, 2022 Cattle crush from James all complete and now adding a bit more detail onto Britains Keenan feeder 4 Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted November 27, 2022 Share Posted November 27, 2022 Bit more done to the trimmer, got first coat of paint on got too cold to get a second so will do another tomorrow. Also got the wheels sprayed up and the front axle built for the tractor. It was part of a scrap Leyland I purchased missing parts but will be perfect for this job mounted permanently. Also sneak peak of another project in the background 😉 4 Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted November 27, 2022 Share Posted November 27, 2022 Test fit together. Matches nicely 6 Quote Link to comment Share on other sites More sharing options...
Stabliofarmer Posted November 27, 2022 Share Posted November 27, 2022 Looks a good match Zac, very interesting project in the background 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted November 29, 2022 Share Posted November 29, 2022 would she manage it i wonder 9 Quote Link to comment Share on other sites More sharing options...
smithy Posted November 29, 2022 Share Posted November 29, 2022 maybe not up hill Quote Link to comment Share on other sites More sharing options...
Pete132 Posted November 29, 2022 Share Posted November 29, 2022 Manage to move it round the yard Quote Link to comment Share on other sites More sharing options...
Jack390 Posted November 29, 2022 Share Posted November 29, 2022 Would be fine on flat ground Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted November 29, 2022 Share Posted November 29, 2022 yeah she would struggle, but i have not got any stuff that would pull it unboxed, not that we ever had a mf big baler Quote Link to comment Share on other sites More sharing options...
Jack390 Posted November 29, 2022 Share Posted November 29, 2022 The 8280 would be smart on it, that’d pull it 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Anderson Agri Posted December 2, 2022 Popular Post Share Posted December 2, 2022 (edited) Another small project finished off, Marge ford 5610 that has been fitted with a new front axle and imber wheels all round, then a pair of John Deere link arms at the rear. I bought it unfinished just finished it off and painted the axle and linkage this evening and also made the steps blue as per standard for force II. More UK spec tractor than the standard Marge offering(and yes the shaving brush is my way of dusting models 👌😆 it's very effective and soft on them) Edited December 2, 2022 by Anderson Agri 14 Quote Link to comment Share on other sites More sharing options...
Pete132 Posted December 2, 2022 Share Posted December 2, 2022 Brush is a good tip 1 Quote Link to comment Share on other sites More sharing options...
New Hollander Posted December 2, 2022 Share Posted December 2, 2022 (edited) 2 hours ago, Anderson Agri said: Another small project finished off, Marge ford 5610 that has been fitted with a new front axle and imber wheels all round, then a pair of John Deere link arms at the rear. I bought it unfinished just finished it off and painted the axle and linkage this evening and also made the steps blue as per standard for force II. More UK spec tractor than the standard Marge offering(and yes the shaving brush is my way of dusting models 👌😆 it's very effective and soft on them) Don´t forget the air intake pre cleaner. Well done. Edited December 2, 2022 by New Hollander Quote Link to comment Share on other sites More sharing options...
JEP Posted December 2, 2022 Share Posted December 2, 2022 On 10/31/2022 at 5:38 PM, Tractorman810 said: finally got back to a bit of printing ,and something i have wanted to do for a while,one one james resin ford d series, printed chassis, with working steering, and a drop side tipper, which will have a couple of runs round of greedy boards as well, ,we did have one of these(single axel) for a few years before we bought a leyland constructor for our grain wagon, so a little artistic imagination here, but the body's much the same .nothings fixed yet, just a mock up to make sure i have all the dimensions right . Liking that a lot Sean, Classic 70's Farm Grain truck. Excellent job. Look forward to seeing it finished - Your MF or JD combine unloading into it!! Did you print the wheels yourself? Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted December 2, 2022 Share Posted December 2, 2022 1 hour ago, Pete132 said: Brush is a good tip I've tried a few things over the years and it's proved the best, it's soft and delicate doesn't knock beacons or mirrors off, and with so many bristles can get right in tight areas 49 minutes ago, New Hollander said: Don´t forget the air intake pre cleaner. Well done. Yes I need to find one. Unfortunately came broken Quote Link to comment Share on other sites More sharing options...
Dusty Dan Posted December 2, 2022 Share Posted December 2, 2022 On 11/18/2007 at 9:29 PM, MODELFARMER said: Tonight got home at 12.30AM Dismanteled 7 mtx's and done a few tweaks to somethings now in process of finishing these 4 ladies http://i115.photobucket.com/albums/n315/Modelfarmer/IMGP0322.jpg And I like your avatar and signature too Quote Link to comment Share on other sites More sharing options...
Dusty Dan Posted December 2, 2022 Share Posted December 2, 2022 On 10/23/2022 at 2:58 PM, Jack390 said: Added some greedy boards to the west dual muck spreader today Really just what I appreciate! 1 Quote Link to comment Share on other sites More sharing options...
Tractorman810 Posted December 4, 2022 Share Posted December 4, 2022 not fixed properly yet, but something i have wanted to do since the replicagri 188’s came out, uh 1200(work in progress) with a 188 back end grafted in, so proper(not acurate) working 3 point rear end, this is what i have been buying up 3 d printed implements for ,seeing as the brushwood scrap sale has provided me 2 cheap 188’s i had a go. still need to sort the top link mount,and surround for the hydralics ect at the rear 5 Quote Link to comment Share on other sites More sharing options...
NIGEL FORD Posted December 4, 2022 Share Posted December 4, 2022 On 12/2/2022 at 9:10 PM, Anderson Agri said: I've tried a few things over the years and it's proved the best, it's soft and delicate doesn't knock beacons or mirrors off, and with so many bristles can get right in tight areas Yes I need to find one. Unfortunately came broken you should have asked... I do them for all the 7000 + series! Quote Link to comment Share on other sites More sharing options...
catkom3 Posted December 4, 2022 Share Posted December 4, 2022 2 hours ago, Tractorman810 said: not fixed properly yet, but something i have wanted to do since the replicagri 188’s came out, uh 1200(work in progress) with a 188 back end grafted in, so proper(not acurate) working 3 point rear end, this is what i have been buying up 3 d printed implements for ,seeing as the brushwood scrap sale has provided me 2 cheap 188’s i had a go. still need to sort the top link mount,and surround for the hydralics ect at the rear Don't know if these would be any interest to you Sean, But brass turnbuckles make good and adjustable top links from Cornwall boats, https://www.cornwallmodelboats.co.uk/cgi-bin/sh000001.pl?WD=turnbuckles&PN=43409-Bottlescrew-15.3mm--Pack-of-10--43409.html#SID=310 Regards Joe. Quote Link to comment Share on other sites More sharing options...
Anderson Agri Posted December 4, 2022 Share Posted December 4, 2022 2 hours ago, NIGEL FORD said: you should have asked... I do them for all the 7000 + series! I didnt think until afterwards! Ive got a few bits coming up i will need so ill have to remember it 🤣 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.